Gamma 7000 Es Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Besaitungsmaschinen Gamma 7000 Es herunter. Gamma 7000 Es 20 Seiten.

Instructions for Unpacking and Preparing for Assembly

The 7000 Es is shipped in two cartons, a large carton for the stringing machine and

accessories and a smaller carton for the post and base. Please save the cartons and

packing materials for possible shipments in the future. Gamma Sports can not be respon-

sible for machines which are not shipped in there original, undamaged packaging. The only

tools you will need to assemble the 7000 Es is a screw driver. The balance of tools needed

for assembly are provided with the machine. Due to the weight of the tensioner unit, you

may need the assistance of someone to help lift the tensioner unit out of the carton.

Once the cartons are opened, remove all inner cartons and check to be sure that all parts

are accounted for. DO NOT REMOVE THE FOAM PACKING MATERIALS AROUND THE

BASE OF THE TENSIONER UNIT AT THIS TIME. THIS PACKING MATERIAL SHOULD

REMAIN IN PLACE TO PROTECT THE TENSIONER WHILE REMOVING IT FROM THE

INNER CARTON.

Small Post Carton Contains :

(1) Lower Post

(2) Upper Post with Flange

(4) Legs

(1) Winged Locking Knob Screw

(4) M8 x 25 Flat Head Screws

(4) M8 x 30 Cap Screws

Large master carton is a double carton with an inner carton containing :

(1) Tensioner Assembly with Turntable Installed (bolted to inner carton)

(1) Power Cord

(2) Suspension Mounting Stands w/ Side and Slide Support Fitted w/ Plastic Adapters

(2) Fixed String Clamps w/ Bases, Slide Bushings, and Wing Nut Screws

(2) Mounting Stand Locking Levers w/ Washers

(2) Badminton Frame Support Slides w/ Plastic Adapters

(1) Package of Spare plastic adapters for mounting system (contains 12 pcs)

(4) Rubber Feetw/ Screws

(1) Foot Pedal Tensioner Switch

(1) Tool Kit (contains side cutter, bent nose pliers, needle nose pliers)

(1) Straight Stringers Awl

(1) Pathfinder Specialty Awl

(2) Composite Badminton Floating Clamps

(1) 6 mm "T" Handle Hex Wrench

(1) 5 mm "T" Handle Hex Wrench

(1) 4 mm "T" Handle Hex Wrench

(1) 2 mm "L" shaped Hex Wrench

(1) 2.5 mm "L" shaped Hex Wrench

(1) 3 mm "L" shaped Hex Wrench

7000ES

Parts and Unpacking