Gamma PRO 100 Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Besaitungsmaschinen Gamma PRO 100 herunter. Gamma PRO 100 11 Seiten.

STRINGING THE FRAME

Starting the Main Strings

To begin stringing the main strings, count

the number of holes at the throat of the

frame, which will determine the starting point.

For racquets with 4 or 8 holes at the throat,

the main strings will begin at the head. For

racquets with 2 or 6 holes at the throat, the

main strings will begin at the throat.

Thread the two ends of the string through the

two center grommet holes at the head or

throat as determined in the previous step.

Route the strings through the opposite center

holes.

Clamping the First Main String

Thread one end of the string through the

adjacent grommet hole and pull excess by

hand. Clamp both the center and the adja-

cent string to each other on the inside of the

frame.

Pulling Tension

While holding the tension bar slightly above

horizontal, wrap the free string clockwise

around the gripper drum once and position

between the gripper jaw.

Gently turn the gripper clockwise while

squeezing the jaws together until all slack in

the string is removed.

Note: For proper operation, the string gripper

jaw must be in the position shown. The

tension in the string provides the clamping

force to the jaws.