Gamma Progression 600 Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Besaitungsmaschinen Gamma Progression 600 herunter. Gamma Progression 600 15 Seiten.

STRINGING THE FRAME

Clamping the String

Clamp the tensioned string to the next adja-

cent string using the second string clamp.

Release the string from the gripper by raising

the tension arm.

Repeat the procedure for all of the remaining

main strings and tie off following the racquet

manufacturers recommendations.

Starting the Cross Strings

Follow the manufacturer's recommended

stringing pattern for one or two piece string-

ing. This will determine the starting point for

the cross strings. If applicable, tie the first

cross string using an appropriate starting

knot.

Weave the cross strings over and under the

main strings being careful to alternate the

weave of each consecutive cross string so

as to be opposite of the previously installed

cross string.

Once the final cross string is tensioned and

clamped, tie off at the appropriate hole speci-

fied by the racquet manufacturer.