Gamma X-6FC Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Besaitungsmaschinen Gamma X-6FC herunter. Gamma X-6FC 20 Seiten.
Auch für Gamma X-6FC: Benutzerhandbuch (20 seiten)

Seite drucken

STRINGING THE FRAME

Clamping the String

Secure the tensioned main string using

the remaining fixed clamp. Release the

string from the gripper by raising the ten-

sion arm.

Repeat the procedure for all of the remain-

ing main strings and tie off following the

racquet manufacturers recommendations.

Weaving the Cross Strings

Follow the manufacturer's recommended

stringing pattern for one or two piece stringing.

This will determine the starting point for the

cross strings. If applicable, tie the first cross

string using an appropriate starting knot.

Weave the cross strings over and under

the main strings being careful to alternate

the weave direction of each consecutive

cross string so as to be opposite of the

previously installed cross string.

Completing the String Job

Once the final cross string is tensioned and

clamped, tie off at the appropriate hole speci-

fied by the racquet manufacturer.

Remove the frame from the mounting system

by loosening the shoulder supports and

frame supports.