Gamma X-Stringer Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Besaitungsmaschinen Gamma X-Stringer herunter. Gamma X-Stringer 19 Seiten.

ASSEMBLY INSTRUCTIONS

Locking the Turntable

The turntable may be locked in any position.

The turntable winged lock knob is packed

separately in the accessory polybag. Install

the lock knob into the threaded hole located

on the side of the tensioner bar post.

Rotate the knob clockwise to lock the turn-

table, and counter-clockwise to release the

turntable.

Setting the Gripper Jaw Spacing

The gripper jaws of the tensioner are adjust-

able to accomodate varying string gauges.

If the string slips through the gripper jaws

while pulling tension, rotate the gripper jaw

adjustment screw counter-clockwise.

If the string is damaged while pulling tension,

rotate the gripper jaw adjustment screw clock-

wise.

The jaws will be properly adjusted when

there is enough pressure to securely grip the

string without causing damage to the string.

String Clamp Installation

The post of the string clamp and tube of the

string clamp base are treated with grease to

provide protection against corrosion during

shipping. Remove any excessive grease

with a clean cloth prior to use. The post and

tube may also be cleaned with isopropyl

alcohol. After this type of thorough cleaning,

the post and tube should be treated with a

light coating of machine oil to protect the

surfaces against corrosion and to ensure

smooth operation.