Decibel Eleven Dirt Clod Merkmale und Betrieb - Seite 5

Blättern Sie online oder laden Sie pdf Merkmale und Betrieb für Musik-Pedal Decibel Eleven Dirt Clod herunter. Decibel Eleven Dirt Clod 7 Seiten.

WORKING WITH PRESETS

The 10 user presets can be selected using the footswitches in either PRESET mode or

BANK mode. Please see the following section on Operating Modes for more details.

When the Dirt Clod gets enabled, a preset is loaded from memory. The control settings

are taken from the saved preset and not from the physical position of the control

knobs. Therefore, the position of the knobs may not be aligned with the settings of the

loaded preset. For example, the loaded preset may have DIRT set at 11 o'clock, but the

physical DIRT knob is set to 3 o'clock.

In order to quickly find the current preset's settings, the display is used to indicate

knob position. Once a knob starts to rotate, the display will show whether the knob is

set too high or too low, similar to the way an electronic tuner works. The upper line of

the display is lighted if the current knob position is higher than the preset setting, and

the lower line of the display is lighted if the current knob position is lower than the

preset setting. Once the knob position is aligned with the preset setting, the middle line

of the display will light.

When turning knobs, the control will not engage until the knob position reaches the

setting of the currently loaded preset. For instance, in the previous example, turning

the DIRT knob will not change the sound until the knob reaches the 11 o'clock

position. Once the DIRT control is engaged, it will behave like an ordinary pedal knob.

Once changes are made to the knob settings from that of the loaded preset, the yellow

PRESET EDITED LED will light.

Saving a Preset

All knob settings can be saved to the current preset number at any time by simply

pressing and holding the DIRT knob for 5 seconds. All of the LEDs will flash to indicate

the preset has been saved.

The top panel footswitches can function in two different modes to access presets.

BANK Mode

In BANK mode, the two switches act like two independent preset switches. Pressing

the 'A' switch will toggle the A preset, and pressing the 'B' switch will toggle the B