Gamma Starburst 7x18w Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Beleuchtungsanlagen Gamma Starburst 7x18w herunter. Gamma Starburst 7x18w 11 Seiten. 7x18w rgbwa+uv led par
Before mounting the fixture to any surface, make sure that the installation area can
hold a minimum point load of 10 items the device's weight.
Fixture installation must always be secured with a secondary safety attachment, such
as an appropriate safety cable.
Never stand directly below the device when mounting, removing, or servicing the fix-
ture.
From a ceiling, or set on a flat level surface (see illustration below). Be sure this fixture
is kept at least 0.5m (1.5ft) away from any flammable materials (decoration etc.).
Always use and install the supplied safety cable as a safety measure to prevent acci-
dental damage and/or injury in the event the clamp fails.
∙Don't try to modify the fixture without any instruction by the manufacturer or the ap-
pointed repairing agencies.
∙Warranty is voided if there are any malfunctions from not following the user manual
while operating or any hazardous operation, like shock short circuit, electronic shock,
lamp broken, etc.
Allow the Starburst Par LED to cool for at least 15 minutes before handling after use.
Starburst 7x18w Par – GAMMA LED Vision
Page 4 of 11