Decimator MD-HX Betriebshandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Medienkonverter Decimator MD-HX herunter. Decimator MD-HX 11 Seiten. Hdmi / (3g/hd/sd)-sdi cross converter with scaling and frame rate conversion
Auch für Decimator MD-HX: Betriebshandbuch (11 seiten)
Seite drucken
- 1. Flow Chart
- 2. Main Menus
- 3. Input Status
- 4. Controls
- 5. Control/Hdmi out Type/Duc Source/Duc Ref/No Signal Back GD/3G Output Is B/Output 1 Is Loop
- 6. Scaling
- 7. Scaling/Output Format/Sd2Sd Aspect
- 8. Scaling/Hd2Sd Aspect/1080I/Horz Filter/Horizontal Flip/Vertical Flip
- 9. Audio
- 10. Setup/Load Defaults/Lcd off Time/Back2Status Time/Auto Save
- 11. Warranty
4. Scaling / HD2SD ASPECT (Has SUB‐MENU with parameter)
This is the aspect ratio conversion used when the Scaler is converting HD to SD.
When the sub menu is highlighted, press the ENTER button to enter this sub‐menu.
Press the < and > buttons to move left or right through the 11 aspect ratio conversions listed below and the
BACK button to leave this SUB‐MENU.
1. ANAMORPHIC (IN and OUT have same aspect)
2. IN=16:9 FS,OUT=14:9 with 16:9 LB
3. IN=16:9 FS,OUT=4:3 with 16:9 LB
4. IN=16:9 FS,OUT=14:9 with 16:9 CC
5. IN=16:9 FS,OUT=4:3 with 16:9 CC
6. IN=16:9 with 14:9 PB,OUT=4:3 with 14:9 LB
5. Scaling / HD2HD ASPECT (Has SUB‐MENU with parameter)
This is the aspect ratio conversion used when the Scaler is converting HD to HD.
When the sub menu is highlighted, press the ENTER button to enter this sub‐menu.
Press the < and > buttons to move left or right through the 3 aspect ratio conversions listed below and the
BACK button to leave this SUB‐MENU.
1.) ANAMORPHIC (IN and OUT have same aspect)
2.) IN=16:9 with 14:9 PB,OUT=16:9 with 14:9 ZM
3.) IN=16:9 with 4:3 PB,OUT=16:9 with 4:3 ZM
6. Scaling / 1080i=1080psf (Parameter)
This indicates if 1080i is recognised as 1080psf instead of 1080i. As 1080i and 1080psf have the same format
structure.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.) No
2.) Yes
7. Scaling / Horz Filter (Parameter)
This indicates the level of the horizontal anti‐aliasing filter prior to the Scaler.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.) Auto
2.) None
3.) Low
4.) Medium
5.) High
8. Scaling / Horizontal Flip (Parameter)
This flips the image horizontally.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.) No
2.) Yes
9. Scaling / Vertical Flip (Parameter)
This flips the image vertically.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.) No
2.) Yes
MD‐HX OPERATING MANUAL VERSION 1.3
Copyright © 2015 Decimator Design Pty Ltd, Sydney, Australia
E&OE
1080i input = 1080i
1080i input = 1080psf
7. IN=16:9 with 14:9 PB,OUT=4:3 with 14:9 CC
8. IN=16:9 with 14:9 PB,OUT=16:9 with 14:9 ZM
9. IN=16:9 with 4:3 PB,OUT=14:9 with 4:3 PB
10. IN=16:9 with 4:3 PB,OUT=16:9 with 4:3 ZM
11. IN=16:9 with 4:3 PB,OUT=14:9 with 4:3 ZM
6