Decimator DMON-16SL Betriebshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Sicherheitssystem Decimator DMON-16SL herunter. Decimator DMON-16SL 10 Seiten. Decimator dmon-16sl 1to16 channel (3g/hd/sd)?sdi multi?viewer with hdmi output

Seite drucken

6. SETUP / Demo Cycle Time (Parameter)

The Demo Cycle Time determines the amount of time to elapse before cycling to the next item. When the sub

menu is highlighted, press the ENTER button to enter this sub‐menu.

Press the < and > buttons to move left or right through the time until the unit moves to the next item in the

cycle.

Default time is 10 Seconds, Maximum time is 256 Seconds

Note: The parameter will only be updated when leaving this sub‐menu.

SERVICE WARRANTY

Decimator Design warrants that this product will be free from defects in materials and workmanship for a

period of 36 months from the date of purchase. If this product proves to be defective within this warranty

period, Decimator Design, at its discretion, will either repair the defective product without charge for parts and

labour, or will provide a replacement product in exchange for the defective product.

In order to service under this warranty, you the Customer, must notify Decimator Design of the defect before

the expiration of the warranty period and make suitable arrangements for the performance of service. The

Customer shall be responsible for packaging and shipping the defective product to a designated service centre

nominated by Decimator Design, with shipping charges prepaid. Decimator Design shall pay for the return of

the product to the Customer if the shipment is to a location within the country in which the Decimator Design

service centre is located. The Customer shall be responsible for paying all shipping charges, insurance, duties,

taxes, and any other charges for products returned to any other location.

This warranty shall not apply to any defect, failure or damage caused by improper use or improper or

inadequate maintenance and care. Decimator Design shall not be obligated to furnish service under this

warranty a) to repair damage resulting from attempts by personnel other than Decimator Design

representatives to install, repair or service the product, b) to repair damage resulting from improper use or

connection to incompatible equipment, c) to repair any damage or malfunction caused by the use of non‐

Decimator Design parts or supplies, or d) to service a product that has been modified or integrated with other

products when the effect of such a modification or integration increases the time of difficulty of servicing the

product.

DMON‐16SL Hardware Manual for Firmware Version 1.1