Bristol Clifton 8 Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Herd Bristol Clifton 8 herunter. Bristol Clifton 8 16 Seiten. Multifuel stoves
Seite druckenUNPACKING & ASSEMBLY OF YOUR STOVE.
WARNING: DUE TO THE WEIGHT OF THE STOVE IT IS RECOMMENDED THAT TWO
PEOPLE ARE REQUIRED TO MOVE & PERFORM THE UNPACKING AND ASSEMBLY
2.1 Remove the outer packaging
Carefully remove the packing straps and lift off the upper crate. Remove the plastic bag & take
down to the base of the stove. Ensure the plastic bag is disposed of correctly and kept away from
children.
2.2 UNPACKING.
Before assembling, place check contents against the following list and advise your dealer
immediately if any parts are missing
1 x Stove body
1 x Flue Spigot with Fireproof Gasket
1 x Firebox Primary Baffle plate A
1 x Firebox Secondary Baffle plate B
1 x Flue Blanking Plate
1 x Ash pan & Handle
1 x Grate
1 x Vermiculite brick set
1 x Heat resistant glove
1 x Fixing Kit
2.3 ASSEMBLY.
Open the door and remove ash-pan, flue spigot and fixing kit from inside the
stove.
1. Sit the stove upright and attach the flue spigot for top exit (as pictured),
using the screws supplied. Ensure the fireproof gasket is correctly seated
in the base of the flue adaptor.
2. Install the blanking plate to the alternative flue exit opening. If rear exit
flue configuration is to be used, the blanking plate will be fitted to the top
exit on the stove and the spigot to the rear.
3. Set the ash-pan in position as shown in the picture. An ash-pan
handle is supplied for when the stove is in use.