Gamma Scale GMC-330 Betriebshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Skalen Gamma Scale GMC-330 herunter. Gamma Scale GMC-330 6 Seiten. Digital counting scale

3.3 Tare

When the goods are placed on scale platform and it the weight is regarded as

tare to deduct. Press TARE, the window will display 0.

3.4 Fixed number call

3.4.1 If you need to set the fixed number call, the operating steps are as follows:

input the fixed number, then press FIXED NUMBER CALL key. If the count on the

platter is more than the set number, the scale will give our beep sound. If the unit

weight window displays ''ERR NO", it means the input value is wrong (for example,

if it has a decimal point).

3.4.2 To cancel the set fixed number call, the operating steps are as follows: Press 0,

and then press FIXED NUMBER CALL.

3.5 Counting for Known unit weight

If the unit Wright of goods is already known, directly input the unit weight value by

pressing digit keys and press UNIT WEIGHT SET to confirm it, at this time the

weigh value will be displayed in its unit weight window and you can count the

goods.

3.6 Counting for unknown unit weight

If the unit weight of the goods isn't known, you can sample first, the steps are as

follows:

3.6.1 Place certain amount of the goods on the platform, the weight value will be

displayed in its weight window.

Note: When sampling goods, you must fully pay attention to the weight of the

goods and unit error. You should generally sample more goods, thus the average

value limit obtained will be comparatively accurate.

3.6.2 Press the digit keys to input the count of sampling; the value will be displayed

in its unit weight window.

3.6.3 Press COUNT SET to set it, at this time, the unit weight counted is displayed

in its unit weight window and the sampled Count is displayed in its count window.

Now the operating for the Unit Wright input is finished. If file unit weight

window displays Error, it means the input value is wrong (For example, if it has a

decimal point).

3.6.4 Place the goods counted on the platform, at this moment the count of goods

will be displayed in its count window.

Note: In the way of sampling as 3.5 and 3.6, if the unit weight window displays

I0SPI, it means the unit weight is too light. Every sample weight should be more

than or equal to 0.2d.

3.7 Clearing of unconfirmed input digit (unit weight of sampling or count)

- 3 -