DECKED DR6 Installationsanleitung Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Zubehör für Kraftfahrzeuge DECKED DR6 herunter. DECKED DR6 15 Seiten. Ram 1500 (2019-current, new body style only)

Seite drucken

INSTALL: CABSIDE FOAM SEAL

NOTE: You won't need this seal if you have a tonneau cover or camper shell.

• Loosen all four J-hooks if you jumped the gun and tightened them already.

• Standing at the tailgate end of the bed, grab deck panels and pull the whole system as far toward the tailgate end

as possible.

• Climb up on deck and place foam seal in the gap between the deck and cabside panel with the adhesive side

facing the deck, not the truck, as shown in DETAIL A. The top edge of foam seal should be level with the top edge

of the deck.

NOTE: Depending on how the seal is unrolled, the paper carrier may not end up on the adhesive

side of the seal. Check for stickiness in determining the adhesive side of the seal.

• Slowly stick the foam seal across the deck panel and remove the paper carrier as you go.

• Once foam seal is in place, stand at tailgate end of bed and push the DECKED system as far towards the cab as

possible to compress the seal.

DETAIL A

8-15-2018

www.mopar.com

CABSIDE FOAM SEAL

(shown in red)

Place seal in gap. Align with top edge of deck panel.

Affix adhesive side of seal to deck.

CAB

K68622704