Green Brook t205-c Gebrauchsanweisung

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Schalter Green Brook t205-c herunter. Green Brook t205-c 2 Seiten. 7 day fused timer spur switch

Seite drucken

SUMMER MODE

1. In operating mode, pressing the 'PROG'

and 'TIME' (combination of buttons) to set

the summer mode. The clock will forward

on one hour (showing the icon

(Example: the clock will change to '11.00', if the time is '10.00' now

press "PROG' and 'TIME'.)

Note: Pressing the 'PROG' and 'TIME' (combinations of buttons) to exit the summer mode.

WIRING DIAGRAM

T205

13A Fuse

Supply

BATTERY BACK UP/LIFE

Note: Battery is fully charged after 14.5 hours.

The non-replaceable, fully charged battery, will retain any program information

for a period of 700 hours should their be power loss or the unit switched off with

the double pole isolation switch.

Display is not visible during this period unless a button is pressed.

TECHNICAL INFORMATION

Display:

Working Voltage:

Rated Impulse Voltage: 2,500V

Operating Temp:

Operation:

Max Load:

Resistive -

Inductive -

Isolation:

Switch

Conforms to:

Working Environment: Indoor use only

Pollution Degree:

Your GreenBrook Fused Timer Spur Switch

is guaranteed for 1 year from

the date of purchase.

This is in addition to your statutory rights.

PLEASE KEEP THESE INSTRUCTIONS

SAFE FOR FUTURE REFERENCE

WEST ROAD . HARLOW

ESSEX . CM20 2BG . UK

[email protected]

www.greenbrook.co.uk

Dia.22

Dia.22).

TIMER

Isolation Switch

LCD

230V-50Hz

-5°C to +40°C

Integrated Control

13A

Double Pole Isolation

BS 1363-4:1995+A4:2012,

BS EN 60730-1:2011,

BS EN 60730-2-7:2010.

GUARANTEE

Installation /Operating Instruction

for 7 day Fused Timer Spur Switch

Please read the instructions fully before attempting installation.

IMPORTANT

This unit should be installed by a competent person

in accordance with the current IET Wiring Regulations.

If in doubt consult a qualified electrician

• Timer Spur must not be mounted on a flammable surface.

• Ensure that the Timer Spur does not come into contact with any

Load

combustible materials such as towels or bedding.

• Ensure at least a 300mm air space is allowed around the Timer Spur

switch.

• A 12mm pattress is provided if extra spacing is required.

• Twin Earth terminal provided.

Note: Where earthing termination is required this must be connected to

a earth terminal as provided in a metal back box.

'ON' Indicator

Fuse

Holder

Dia.1

RESET THE DEVICE

1. To fully reset this unit press the recessed

'Reset' button with a insulated blunt probe.

2. A full display will show when the battery is

charged, then revert to the default screen

(

). No display indicates that the

battery requires charging for a minimum 3

hour period. (Dia.2 - Full display)

SETTING THE DAY OF WEEK

AND TIME

Note: Time setting is 24 hour mode.

1. Press the 'TIME' button for 2 seconds. Day of

week will start flashing (example shows 7 Day

setting Dia.3)

2. Use the '+' or '-' button to change the

display to the correct day of the week.

3. Press the 'TIME' button and the hour digits will

flash.

(Dia.4)

4. Use the '+' or '

' button to set the hours.

5. Press the 'TIME' button and the minute digits will

flash. (Dia.5)

6. Use the '+' or '-' button to set the minutes.

7. Press the 'TIME' button to save the setting

and return to operating mode.

- Model: T205-C

OPERATING INSTRUCTIONS

Programme

Button

'+' and '-'

Button

Front Cable

Entry

Double Pole

Isolation Switch

Dia.2

Dia.3

Dia.4

Reset

Time