Deckma Hamburg FMS3000 Installationsanleitung Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Sicherheitssystem Deckma Hamburg FMS3000 herunter. Deckma Hamburg FMS3000 13 Seiten. Fire alarm system

Seite drucken

Technical documentation

General

The FMS3000 consists of several modules in separate housings. The individual modules are

connected to each other through an internal BUS (Binary Unit System) and a common supply voltage

(24V DC). All modules, with the exception of the main panel, are intended for mounting on a support

rail and are normally installed together in a metal switch cabinet. The main panel (HT) is constructed

as a front panel built-in device. The FMS3000 can either be wall mounted or mounted in a console.

When a fire detector detects a fire, then the fire loop module (FM) recognises the event. The main

module (BUS Master) cyclically queries the status of all modules. In the course of this, it receives the

fire alarm from the fire loop module (FM). Independent of the configuration, the main module transmits

to the output module which outputs it should connect. In addition, it transmits the fire alarm to the

VDR module and printer module (if present). VDR and printer module output the fire alarm through a

VDR output or through the printer. In addition, the main module informs the main panel (HT) about the

fire alarm, and it then warns the user acoustically and optically of a fire.

Cabling requirements

For safe operation of the entire system, the following cables are recommended:

Plug

POWER Main (JN0-M)

POWER Emergency

(JN0-E)

24V OUT (JN1)

24V IN/AKKU (JN1)

MONITORING (JN2)

RELAY (JP10)

FMS-BUS (JP1-JP9)

RELAY (JAN,JAP)

LOOP (JLN, JLP)

RELAY (JR1, JR2)

24V OUT (JOC1)

TST IN+24V OUT

(JOC2)

FMS-BUS (JR1)

Tel.: +49 (0)4105 / 65 60 – 0 *

Installation Instructions

Module

power supply

main module

power supply/main

module

main module

main module/fire loop

module (FM)/output

module/VDR

module/printer module

fire loop module (FM)

output module

main panel

DECKMA GmbH

[email protected]

Email:

201309IA

Cable type

unshielded cable

shielded twisted pair

cable

unshielded cable

shielded twisted pair

cable

* Fax: +49 (0)4105 / 65 60 – 25

www.deckma-gmbh.de

* Internet:

Version 0.2

27/09/2016

FMS3000

Wires - diameter

Min. 3 x 1.5mm²

Min. 2 x 1.5mm²

(power supply); Min 2

x 1.5mm²

(accumulator)

Min. 6 x 0.75mm²

Min. 2x0.75mm²

2x2x0.75mm²

Min. 2-5 x 0.75mm²

Min. 2-8 x 0.75mm²

Min. 2/8 x 0.75mm²

Min. 2/4 x 0.75mm²

5 x 2 x 0.75mm²

page 3 of 13