Centurion SMART GUARD air Betriebsanleitung - Seite 6
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Toröffner Centurion SMART GUARD air herunter. Centurion SMART GUARD air 12 Seiten. High security keyless access control
Auch für Centurion SMART GUARD air: Betriebsanleitung (11 seiten)
Seite drucken
12. Setting the ke
The following procedure sets the number of seconds for which
keystrokes remain valid. This ensures that if a partial code has been
entered, it is wiped out of the keypad buffer after a preset time, and
must be re-entered in its entirety.
The clearing of the keypad buffer is indicated by the keypad's back
light turning off.
The factory default for the key
Enter the following keystrokes:
1. Enter Program Mode
2. Select
3. Enter
W
4. Exit Program Mode
If the Wipeout time is set to
(only applicable to externally powered devices)
Disabling the key Wipeout time will:
Compromise the security of the system
Cause a code entry to be incorrectly recognised as a wrong
code if an incomplete code was previously entered
Example:
Set the key Wipeout time to 15 seconds.
Master Code=
Enter the following keystrokes:
1. Enter Program Mode
2. Select Wipeout Menu
3. Enter Wipeout Time
4. Exit Program Mode
Example:
Disable key Wipeout time.
Master Code=
Enter the following keystrokes:
1. Enter Program Mode
2. Select Wipeout Menu
3. Enter Wipeout Time
4. Exit Program Mode
13. Setting the security parameters
The following procedure sets the conditions under which the Alarm
channel (Channel 3) will activate. This also sets the anti-default and
tone mute features.
The following alarm conditions can be set:
Duress (Code +
1
Adding
normal, but also activates the alarm channel. This is used if entering
under duress. E.g. If the access code is
1
2
3
Alarm (
Pressing the
channel.
Wrong Codes (Default=off)
When the number of wrong codes is exceeded, the Alarm channel is
activated.
Anti-default feature (Default=on)
Setting this feature prevents the system parameters from being
reset by the defaulting features.
The Master Code can still be defaulted to
this will break the pairing between the SMARTGUARDair and any
paired receivers. This pairing will need to be re-established in order
to continue using the system.
Alarm Tone Mute Feature (Default=off)
Setting this feature turns off the audible feedback when entering a
code. This prevents an eavesdropper from determining the number of
digits in the code. Tones will still be present in Programming Mode.
Enter the following keystrokes:
1. Enter Program Mode
2. Select Security Menu
3. Set (Code+1)
4. Set (*+#)
5. Set (Wrong Codes)
6. Set Anti-default
7. Set Tone Mute
8. Exit Program Mode
W
ipeout Menu
ipeout Time
1
2
3
4
5
1
1
2
3
4
5
0
)(Default=off)
1
to the last digit of an access code activates the unit as
5
gives access, but also activates the alarm
+
)(Default=off)
#
and
keys simultaneously activates the Alarm
#
6
0
turns function off,
y Wi
peout time
W
ipeout timer is five seconds.
Master Code
5
[Seconds]
0
, key Wipeout will be disabled
1
2
3
5
1
2
3
Master Code
0
OR
1
0
OR
1
0
1
OR
0
1
OR
0
OR
1
1
Indicator LEDs
Indicator LEDs
4
Indicator LEDs
4
1
2
3
4
1
2
3
4
Indicator LEDs
turns function on
, entering
, but doing