Major tech MT570 Gebrauchsanweisung - Seite 15

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Prüfgeräte Major tech MT570 herunter. Major tech MT570 16 Seiten. 5kv high voltage insulation tester

Seite drucken

Operation:

During the test run, wait for one minute, DAR will be

displayed automatically; wait for 10 minutes, PI will be

displayed automatically.

3. AUTO OFF:

System will shut down automatically after 3 minutes

without operation.

8. Battery replacement

When the LCD displays "Batt. Low", disconnect the test leads from the

high voltage insulation tester and turn off the power. Replace with

new Alkaline batteries. (1.5V "C" type x 8)

9. Maintenance & repair

9.1. To avoid and electric-shock or device damage, do not wet inner

part of the tester.

9.2. Avoid the tester from being dropped that would damage or

disconnect devices.

9.3. Wipe the tester surface with soft, dry cloth and mild detergent.

Prohibit from using sandpaper or solvent.

Note:

1. This tester is HV operated; user should not open the outer casing. If

any damage occurs, take the tester back to manufacturer for repair.

2. If the tester is not used for over 60 days, remove the batteries for

storage.