Centurion SECTOR II Installationshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Installationshandbuch für Automatische Schranken Centurion SECTOR II herunter. Centurion SECTOR II 19 Seiten. Rectangular boom pole jack-knife led

Seite drucken

SECTION 3

5. Stick the LED strip to the boom

pole by removing the backing.

Start from the side nearest to

the 12mm hole.

Only the blue backing

should be peeled off the

LED strip.

6. Remove the silicone plug, plastic

bumper and end cap from the

Jack-knife boom pole.

7. Mark and centre punch a hole

position 50mm away from the

edge of the Jack-knife boom

pole.

Ensure that the hole is

facing the direction of

traffic.

8. Drill one 12mm hole.

The hole must be drilled

through only one wall of

the boom pole.

LED strip

50mm

12mm

hole

page 10

PHYSICAL INSTALLATION

FIGURE 9

FIGURE 10

FIGURE 11