Gamry Reference 3000 Schnellstart-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Analytische Instrumente Gamry Reference 3000 herunter. Gamry Reference 3000 16 Seiten. Usb potentiostat installation
Auch für Gamry Reference 3000: Schnellstart-Handbuch (4 seiten)

Seite drucken

™

Reference 3000

Potentiostat/Galvanostat/ZRA Quick-Start Guide

Computer and Power Requirements

You must connect the Gamry Potentiostat and install the Gamry

Framework Version 5 software in the same computer. Your

Reference 3000 communicates using the Universal Serial Bus

(USB). This PC must meet the requirements below.

Hardware

•

A Windows-compatible personal computer

•

One available USB port, revision 2.0 (preferred) or 1.1.

•

Use the supplied certified USB interconnect cable with an A/B

connector configuration.

Software

•

Microsoft

Windows

Vista or Windows

bit versions

•

At least 512 MB of memory (1000 MB recommended) and

200 MB of available hard disk space

Power

•

Use the supplied AC to DC power brick.

Installed Potentiostat with Cell Cable Attached

XP, either 32-bit or 64-

Compatibility Between Software Versions

and Potentiostats

Gamry Version 5 software is compatible with all Gamry Potentiostats

in the current generation.

•

The Reference 3000™, Reference 600™ and Series G

Potentiostats work with Gamry Version 5 software only.

•

The PCI4/300™ and PCI4/750™ Potentiostats, and the FAS2™

Femtostat work with either Version 5 or Version 4 of the Gamry

software.

Earlier potentiostat generations (PC4, FAS1, and PC3 Potentiostats)

are not compatible with Version 5 Gamry software.

Authorization Codes and Serial Numbers

A sticker on the software license envelope contains the ten-digit

Authorization Codes needed to install (or upgrade) the Gamry

software.

Before you can use a Gamry software package, you must enter the

Authorization Code to access the software. Authorization Codes are

tied to the five-digit serial number of a specific potentiostat. The

serial number of each Reference 3000 Potentiostat is on a plate on

the bottom of the unit.

If you bought more than one potentiostat (to be installed in more than

one PC), each potentiostat will be packed in a separate carton with

its own controller board and software Authorization Codes. Keep the

contents of each carton together. Authorization Codes are valid only

for the potentiostat shipped with the codes.

988-00008