ENGLISH
Setting the DURATION function
1. Set a heating function. Press
confirm.
2. Press
again and again until
starts to flash.
3. Turn the control knob to set the minutes
and press
to confirm. Turn the control
knob to set the hours and press
confirm.
When the set Duration time ends the signal
sounds for 2 minutes.
flash in the display. The oven turns off
automatically.
4. Press any button or open the oven door
to stop the signal.
5. Turn the knobs to the off position.
This function is not available for Pyrolysis
and for some oven functions.
Setting the END function
1. Set a heating function. Press
confirm.
2. Press
again and again until
to flash.
3. Turn the control knob to set the hours
and press
to confirm. Turn the control
knob to set the minutes and press
confirm.
At the set End time the signal sounds for 2
minutes.
and time setting flash in the
display. The oven turns off automatically.
4. Press any button or open the oven door
to stop the signal.
5. Turn the knobs to the off position.
This function is not available for Pyrolysis
and for some oven functions.
Setting the TIME DELAY function
1. Set a heating function. Press
confirm.
2. Press
again and again until
starts to flash.
to
to
and time setting
to
starts
to
to
3. Turn the control knob to set the minutes
for DURATION time and press
confirm. Turn the control knob to set the
hours for DURATION time and press
to confirm.
The display shows flashing
4. Turn the control knob to set the hours for
END time and press
the control knob to set the minutes for
END time and press
display shows
temperature.
Oven turns on automatically later on, works
for the set DURATION time and stops at the
set END time.
At the set END time the signal sounds for 2
minutes.
and time setting flash in the
display. The oven turns off.
5. Press any button or open the oven door
to stop the signal.
6. Turn the knobs to the off position.
You can change the heating function and
the temperature after you set the TIME
DELAY function.
Turn the knobs to the off positions to stop
the TIME DELAY function.
Setting the MINUTE MINDER
Minute minder can be both set when the
oven is turned on and off.
1. Press
again and again until
to flash.
2. Turn the control knob to set the seconds
and than the minutes.
• Press
one more time to set the
minutes
• Press
two more times to set the
hours
3. Press
to confirm.
4. The MINUTE MINDER starts
automatically after 5 seconds.
15
to
.
to confirm. Turn
to confirm. The
and the set
starts
Seite drucken