Green Force Hybrid Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Taschenlampe Green Force Hybrid herunter. Green Force Hybrid 17 Seiten. Modular lighting systems
Seite drucken- 1. Table of Contents
- 2. PWM Technology
- 3. Green Force Hybrid & TOS
- 4. Temperature Protection
- 5. End of Battery Life
- 6. Maintenance of Your Dive Light
- 7. Flexi Battery Packs
- 8. Hybrid Battery Packs
- 9. Using Your Green Force Dive Light
- 10. Controlling the Power
- 11. Green Force Dynamic Power Management
- 12. Green Force Dynamic Beam
- 13. Diamond Backup Light
- 14. Depth Rating & Warranty
PWM
Green Force uses PWM technology to control the LED light heads.
When using PWM or Pulse Width Modulation the light is switched on and off
extremely fast. The ratio to on and off determines the amount of energy that
flows through the LED. When switched off, no current flows through the LED and
no energy is wasted. Depending on the type of PWM technology, the LED's are
switched on and off about 25.000 to 300.000 times each second. This is faster
than the human eye can register so only the average is registered. This technique
also allows dimming the LED's in circumstances where the maximum power is
not required. Even this application does not cause any loss of energy and will
increase the burn time.
Pulse Width Modulation is controlled by a microprocessor which:
•
Enables a perfect battery management which also prevents damage by deep
discharge.
•
Controls the LED's at maximum capacity without overload.
•
Protects the light head against overheating by constantly measuring the tem-
perature and by reducing the current when necessary. This makes the Hybrid
LED lights perfect for use above water like (camping or hiking).
•
Offers extra options such as dimming.
Technology
Green Force
Green Force Hybrid LED light heads can be used in combination with Alkaline,
NiMH or Lithium battery packs that may range from 4 to 18 Volts. This makes these
light heads extremely versatile.
•
PWM with microprocessor - Multi-voltage 4 to 18V
•
100% and 50% dimmable
•
Watertight TOS connection
•
Thermal/overheating protection (can be used on land)
•
'Bring Me Home' mode
•
Battery deep discharge protection
•
Equipped with newest technology LED's available
•
At least one hour of burn time on Hybrid battery packs
Green Force
* Triple O-Ring Sealing System
All Green Force light heads and umbilicals are equipped with the proven TOS (Tri-
ple O-ring Sealing System). This system ensures maximum safety and durability.
4
Hybrid
TOS*