decoflame Denver Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Innenkamin decoflame Denver herunter. decoflame Denver 16 Seiten. Custom-made bioethanol fireplaces with decoflame e-ribbon fire featuring cevb technology
Auch für decoflame Denver: Installationshandbuch und Benutzerhandbuch (10 seiten)

Seite drucken

1. Troubleshooting

STEP 1: Check that the dimensions of the cut-out are as shown on the technical drawing provided with

the fireplace. All corners of the cut-out must be in a 90° angle and all surfaces in level. Make sure that

there is a earthed

power socket inside the wall cut at the bottom to the right – ideally placed below

the level of the tank (lower than 160mm). Check furthermore, that the cut-out has been prepared in

line with the desired way of installation (i.e. either with the baseplate resting on the surrounding sur-

face, with the edges of the cut-out prepared with a router or using the mounting brackets included).

STEP 2: Lift the Denver Basic™ burner carefully out of its packaging using the two straps. Place the

Denver Basic™ carefully on a level surface. Do not tilt it. Move Denver Basic™ closer to the cut-out and

insert the plug into the socket. If necessary, switch on the socket. Still holding the fire with the straps,

carefully sink it into the cut-out.

STEP 3: After the fireplace is positioned as desired, remove the straps by cutting them from under-

neath the fireplace. Switch on the electronics using the

button, which will unlock the fuel lid. Always

check that the fireplace is connected to the power socket and cable.

STEP 4: Carefully fit the glass screen(s) by inserting the glass holders into the holes in the baseplate.

Please avoid scratching the baseplate.

STEP 5: Fill in the right amount of bioethanol following the instructions.

STEP 6: Start the fireplace by pressing the

button.

6. OPERATING INSTRUCTIONS

BASEPLATE

FLAME TRAY

FUEL INLET

CONTROL PANEL

FUEL TANK AND ELECTRONICS

IF YOU HAVE PURCHASED DENVER BASIC™ wITH UPGRADES, YOUR FIREPLACE wILL HAVE THE

FOLLOwING ExTRA FEATURES:

• 6 flame levels

• Remote controller

• Bluetooth/Decoflame App

TURNING ON

Turn on the electronics of your Denver Basic™ by pressing the

button.