Green Gorilla ProLine Em Benutzerhandbuch - Seite 13
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Farbspritzgerät Green Gorilla ProLine Em herunter. Green Gorilla ProLine Em 20 Seiten. Industrial system
Seite druckenPowerPack Charging
This unit is equipped with the latest in lithium ion power technology. Ensure that
you are only using the Green Gorilla 110Vac charger that came with this unit. The
charger has been matched to the solid state electronics within the PowerPack itself
to ensure safe and reliable charging.
IMPORTANT! A safety interlock system incorporated into this system will not allow
the PowerPack to operate when the charger plug is engaged.
The wall charger is equipped with an indicator light that indicates when your system
is fully charged. The indicator light (as shown in Figure 30) is red during charging
periods and turns green when the lithium ion cells are fully charged. The following
steps should be used when charging your PowerPack.
1. Insert the Green Gorilla standard wall charger into a 110 Vac wall outlet.
2. Locate the charging port cover on your PowerPack X. The charging port cover is
located on the right side of the PowerPack as shown in Figure 31.
3. The charging port is protected by a ip open cover. Gently pull up on the tab to
expose the charging port.
4. Firmly insert the wall charger plug into the port.
5. The wall charger indicator light will turn green when the lithium ion cells are fully
charged. Charge time is approximately 3-5 hrs.
6. After fully charging, remove the charger plug from the PowerPack charging port
and push the protective cover back into place.
7. Ensure that the PowerPack X battery level indicator shows green when the unit is
turned on.
IMPORTANT! If the PowerPack fails to turn on after charging, pull back the
protective cover and gently reinsert. A built-in safety interlock system that
prevents usage while charging may have become engaged due to over- insertion
of the protective cover.
Indicator
Light
g. 30
g. 31
Pg. 12