IKEA 301.541.90 Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kochfeld IKEA 301.541.90 herunter. IKEA 301.541.90 40 Seiten. Burner

Seite drucken

ENGLISH

made by means of a rigid copper or

steel pipe with fittings complying with

local regulations, or by means of a

continuous-surface stainless steel hose

complying with local regulations. The

maximum length of the hose is 2 linear

metres.

Connect elbow (A) or (B) supplied with

to the hob inlet main pipe and interpose

the washer (C) supplied, in compliance

with EN 549.

Washer (D) not supplied with the

product.

Electrical connection

Assembly

After having cleaned the perimeter surface,

apply the supplied gasket to the hob.

Position the hob in the worktop opening

made respecting the dimensions indicated in

the Instruction.

NOTE: the power supply cable must be long

enough to permit its upward extraction.

To secure the hob, use the brackets provided

with it. Fit the brackets into the relevant

bores shown by the arrow and fasten them

by means of their screws in accordance with

the thickness of the worktop.

IMPORTANT: if a stainless steel hose

is used, it must be installed so as not to

touch any mobile part of the furniture.

It must pass through an area where

there are no obstructions and where it is

possible to inspect it on all its length.

After connection to the gas supply, check

for leaks with soapy water. Light up the

burners and turn the knobs from max

position

to minimum position

check flame stability

WARNING

This operation must be performed by a

qualified technician.

The electrical connections must comply

with local regulations.

The earthing of this appliance is

compulsory by law.

Do not use an extension cord.

IMPORTANT: the data relevant to the

voltage and power absorption are

indicated on the rating plate.

Earth

(yellow/green)