IKEA 504.678.35 Handbuch - Seite 11

Blättern Sie online oder laden Sie pdf Handbuch für Kochfeld IKEA 504.678.35 herunter. IKEA 504.678.35 46 Seiten.

Seite drucken

compatible with requested operation.

F0E1

ENGLISH

Wrong power cord connection.

F0E7

The control panel switches off because

F0EA

of excessively high temperatures.

Display code

F0E2, F0E4, F0E6,

Disconnect the hob from the power supply.

F0E2, F0E4, F0E6,

F0E8, F0EC, F1E1,

Wait a few seconds then reconnect the hob to the power supply.

F0E8, F0EC, F1E1, F6E1,

F6E1, F7E5, F7E6

If the problem persists, call the service centre and specify the error code that appears on the display.

F7E5, F7E6

d E

The hob does not switch heat up.

e.g.

The functions do not come on.

[when the hob is off]

The hob does not allow a special

function to be activated.

e.g.

The hob automatically sets a minimum

e.g.

power level to ensure that the cooking

[Power level lower

[Power level lower than

zone can be used.

than level requested]

level requested]

SOUNDS PRODUCED DURING OPERATION

Sounds produced during operation

Induction hobs may whistle or creak during normal operation.

These noises actually come from the cookware and are linked

These noises actually come from the cookware and are linked to the

to the characteristics of the pan bottoms (for example, when

characteristics of the pan bottoms (for example, when the bottoms are

the bottoms are made from different layers of material or are

made from different layers of material or are irregular).

irregular).

These noises may vary according to the type of cookware used

AFTER-SALES SERVICE

and to the amount of food it contains and are not the symptom

of something wrong.

Before calling the after-sales service:

In order to receive a more complete assistance, please register your

If there is a fault try to resolve the problem by following

product on www . indesit . com / register.

troubleshooting guidelines.

BEFORE CALLING THE AFTER-SALES SERVICE:

2. Switch the appliance off and back on again to see if the fault

See if you can solve the problem by yourself with the help of the

persists.

suggestions given in the TROUBLESHOOTING.

If after the above checks the fault still occurs, get in touch

Switch the appliance off and back on again to see if the fault persists.

with the nearest after-sales service.

You can find a full list of IKEA appointed contacts at the end of

IF AFTER THE ABOVE CHECKS THE FAULT STILL OCCURS, GET IN

this user manual.

TOUCH WITH THE NEAREST AFTER-SALES SERVICE.

To receive assistance, call the number shown on the warranty booklet or

follow the instructions on the website www . indesit . com .

Technical data

When contacting our Client After sales service, always specify:

•

a brief description of the fault;

Model: TREVLIG 504.678.35

•

the type and exact model of the appliance;

Type of hob

Type: XXX

Mod.: XXX

XXXXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXX

Made in X

XXXXXXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Number of cooking zones

Heating technology

Dimension of Heater (Ø or LxW)

Energy consumption per cooking zone - (EC electric cooking)

Energy consumption of the hob - (EC electric hob)

This appliance meets the Eco design requirements of European Regulation n.66/2014, in conformity to the European Standard EN

60350-2

The technical information are situated in the rating plate on the

bottom side of the appliance.

Description

Disconnect the hob from the power supply.

Wait a few seconds then reconnect the hob to the power supply.

If the problem persists, call the service centre and specify the error code that appears on the display.

The hob does not allow a special

function to be activated.

The hob automatically sets a

minimum power level to ensure

that the cooking zone can be

used.

XXXX XXX XXXXX

XX XXXX XXXXX

the cooking zone, or it is not compatible

with one or more cooking zones.

The power supply connection is not

exactly as indicated in "ELECTRICAL

CONNECTION" paragraph.

The internal temperature of electronic

parts is too high.

Possible causes

DEMO MODE on.

The power regulator limits the

power levels in accordance

The power regulator limits the power

with the maximum value set

levels in accordance with the maximum

for the hob.

value set for the hob.

The power regulator limits the

The power regulator limits the power

power levels in accordance

levels in accordance with the maximum

value set for the hob.

with the maximum value set

for the hob.

When contacting our Client After sales service, always specify:

• a brief description of the fault;

These noises may vary according to the type of cookware used and to

• the type and exact model of the appliance;

the amount of food it contains and are not the symptom of something

• the service number (number after the word Service on the

wrong.

rating plate). The service number is also indicated on the

guarantee booklet;

•

the service number (number after the word Service on the rating

• your full address;

plate). The service number is also indicated on the guarantee

booklet;

• your telephone number.

If any repairs are required, please contact an authorized after-

sales service (to guarantee that original spare parts will be used

and repairs carried out correctly).

•

your full address;

•

your telephone number.

If any repairs are required, please contact an authorized after-sales

service (to guarantee that original spare parts will be used and repairs

carried out correctly).

In the case of flush-mounted installation, call the After Sales Service to

request assembly of screws kit 4801 211 00112.

Electric

Induction

Left front 15,0 cm

Left rear 21,0 cm

Right rear 18,0 cm

Right front 18,0 cm

Left front 175,1 Wh/kg

Left rear 178,0 Wh/kg

Right rear 170,0 Wh/kg

Right front 171,4 Wh/kg

173,6 Wh/kg

F0E1 code and restore the functionality

of the cooking zone. Then, try to use the

cookware with a different cooking zone, or

use different cookware.

Adjust the power supply connection

according to "ELECTRICAL CONNECTION"

paragraph.

Wait for the hob to cool down before using

it again.

Solution

Follow the instructions in the "DEMO

See paragraph "Power

MODE" paragraph.

management".

See paragraph "Power management".

See paragraph "Power

See paragraph "Power management".

management".

400011415253

HB I84F

PLER8

220-240 V ~ 50-60 Hz

HB I84F

769991010902

I.C.

F101090

7,2 kW

SERVICE

869991010900

901806030988

802080988