Century Helicopter Products Bell 47G II ARF Helicopter Handbuch - Seite 15
Blättern Sie online oder laden Sie pdf Handbuch für Spielzeug Century Helicopter Products Bell 47G II ARF Helicopter herunter. Century Helicopter Products Bell 47G II ARF Helicopter 15 Seiten.
Seite drucken
Muffler, Header & Coupler
[CN1074C]
6. Attach the engine header, the silicon coupler and the muffler but do not attach the cable ties at this
time. Remove the lower forwardmost M3x12 Self Tapping screw from the right side servo tray and install
the 38mm mount plate, replacing the screw. Align the mount stud from the muffler to mount plate and
secure with one M3x10 Socket Cap Screw using threadlock. Attach the pressure tap to the muffler. Attach
the cabin to the side mounts without engaging the front hook and mark the center for the exhaust pipe
where the pipe touches the bottom of the cabin and make the hole with the sanding stone in a moto-tool.
7. The throttle extension will need to be repositioned slightly forward (anti-clockwise) as in the basic
setup it touches a vertical brace on the scale side frame. It may be necessary to bend the collective lever
outwards from the mechanics to avoid it rubbing against the scale side frames. Attach the fuel lines and
route on the right side of the mechanics to the carburetor and the pressure fitting on the muffler. Lastly,
attach the cable tie wraps to the silicon coupler. As glow plug access is obscured, a remote glow plug
adapter is recommended. When changing glow plugs remove the M3x10 SHCS that secures the muffler to
the main mechanics and gently flex the muffler away from the glow plug to provide access.
Parts List:
CN1074B
Bell 47G II Scale Accessory Kit
CN1074C
Scale Muffler with header ................................... 1 set
CN1074D
Scale Side Frames, Tank Mount & Hardware .......... 1 set
Optional Accessories
CN2208
Anti-Rotation Bracket
CN2220A
10mm Main Shaft Thrust Bearing Kit
CN2222
Remote Glow Plug Adapter
CN2235
Triple Bearing Tail Rotor Assembly
CN2412
Hurricane 600mm Fully Symetrical Carbon Rotor Blades - White
CN2413
Hurricane 600mm Semi Symetrical Carbon Rotor Blades - White
CN2660
RotorTech 600mm Fully Symetrical Carbon Rotor Blades - Black/Carbon Weave
CN3018
High Temperature Pipe Coupler 40-50
CNBB1001
14 Piece Ball Bearing Upgrade Kit
523 Sinclair Frontage Road, Milpitas CA 95035 Web: http://www.centuryheli.com
Left side scale
frame has only
one diagonal
brace.
Throttle arm
needs to be re-
positioned to
avoid touching
the vertical brace.
Mount plate
M3x10 SHCS
M3x12 Self Tap
[CN1074C]
Pressure Fitting
[CN1074C]