Century Helicopter Products Predator Max 90 Gebrauchsanweisung - Seite 7
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Spielzeug Century Helicopter Products Predator Max 90 herunter. Century Helicopter Products Predator Max 90 20 Seiten.
Auch für Century Helicopter Products Predator Max 90: Gebrauchsanweisung (20 seiten)
Seite drucken
#HI6032
Rear CCPM Lever
#HI6110
Upper Side Frames
Left & Right
Install the rear ccpm lever into the upper frames flush with
the bearing on the left side, having the mount extend out the
right side frame. Assemble the upper frames but do not use
locktight at this time.
M3x30
Socket Screw
#HW6000
120 Degree
CCPM Setup
Apply locktight to the threads on the inside standoff, insert
between the frames and attach the ccpm cyclic bellcranks
being careful to observe the correct direction. For 140
Degree ccpm setup, move bellcranks to forward holes.
#HI6020
Cooling Fan
M3x8 Self Tap Screw (from behind)
Attach the front cooling fan mount to the vertical front frame
inserting the M3 screw from the flat side of the frame. Note:
8.45:1 gear ratio requires the shroud mount hole to be modified.
8.45:1
only !
Mount
#HW6112A
Vertical Front
Frame
#HI6031
25
CCPM
Cyclic
Bellcranks
#CNLR1020
Medium
Ball
#CNBB37
The stepped standoff is positioned with the step against the
ball bearing in the ccpm bellcrank. Correct orientation has the
two symmetric steel ball facing outwards and the obtuse angle
towards the swashplate.
27
#CNLR1014
Short Ball
Press the rear ccpm lever onto the mount that sticks out of the
right side of the upper frames with the steel ball downwards.
Secure with the M3 button head screw.
#HW6127A
Rear Frame
Standoff Set
29
X-Frame x 2
15mm Servo
Frames x 4
Ensure that the correct standoffs are used in the correct
locations. The 26mm threaded hex standoffs are not shown.
#CNLR1014
Short Ball
26mm
Threaded
Spacer
Stepped
Standoff
M3x10 Button
Head Screw
26mm Threaded
Standoffs x 2
17mm Rear
Frames x 4
26
M3x30
Socket Screw
#HW6000
28
30
#HW6127
Front Frame
Standoff Set
7