Gantner GAT NET.Controller M 7000 Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Kontrolleinheit Gantner GAT NET.Controller M 7000 herunter. Gantner GAT NET.Controller M 7000 5 Seiten. Control unit for the gat net.lock 7000

Seite drucken

Technical data

Nominal voltage U
:
DC
Power supply unit:
Reader types of slave control lers
- GAT NET.Controller S 7000 F/ISO:
- GAT NET.Controller S 7000 B:
- GAT NET.Controller S 7000 ICLS:
Maximum locks per slave
controller:
Maximum slave controllers per
master controller:
Memory (Master):
Digital inputs (master controller): - Master standard: 4
Digital outputs (master contr.):
*expandable to 8 with additional license (Part No. 978440)
Dimensions
1
310.0 mm (12.2")
GAT NET.Controller M 7000
6
5
GAT NET.Controller S 7000
10
Typical application
to the server/host
Ethernet
Supply
Master Controller
GAT NET.Controller M 7000
OUT
RS 485
Supply
GAT NET.Controller S 7000
OUT
IN
GAT NET.Lock 7000
Lockers
Valid from September 15
2015 • Technical data subject to modification without notice!
th
2
DB_GAT-NETCONTROLLER7000--EN_23.indd • Part No.: 573835
24 V
External power supply units available
(see order information)
MIFARE
+ ISO 15693
®
LEGIC
(Advant)
®
HID iCLASS
®
- Slave standard: 24
- Slave light: 12
- Master standard: 8
- Master light: 3*
Internal memory for 10,000 bookings
SD card slot for memory expansion,
log files, firmware update or user lists
- Master light: 0
- Master standard: 4
- Master light: 0
4
3
2
RS 485 + power
Power
GAT NET.Controller S 7000
Plug
OUT
IN
Identification with RFID data carrier
Interface to the locks:
Interface betw. slave and master: RS 485
Master and server:
Connectors:
Housing material:
Dimensions:
Permitted ambient temperature: 0 °C to +60 °C
Protection type:
Protection class:
Weight:
Environment class
based on VdS 2110:
GAT NET.Controller M 7000 Light
7
8
GAT NET.Controller S 7000 Light
9
10
1.
GAT NET.Controller M/S 7000 (same housing for master and slave)
2.
SD card slot
3.
Ethernet interface for PC/server connection
4.
Relay outputs
5.
DC 24 V output
6.
Digital optocoupler inputs
7.
Power supply input (DC 24 V)
8.
RS 485 in-/output (for master / slave controller connection)
9.
MODE and RESET buttons and status LEDs
10. GAT NET.Lock 7000 connection sockets
Supply
Master Controller
GAT NET.Controller M 7000
OUT
Supply
GAT NET.Controller S 7000
OUT
IN
1 Wire (special cable for supply and
data signal)
Ethernet
- Master to server (Ethernet): RJ 45
- Slave to master (RS 485): RJ 45
- Locks: MOLEX, type Micro-Fit 3.0
- Supply: MOLEX
Plastic (ABS - V0)
310 mm x 133 mm x 42 mm
(12.2´´ x 5.24´´ x 1.65´´)
IP 40
I
Approx. 600 g
II (conditions in indoor areas)
3
RS 485
RS 485 + power
www.gantner.com
TM
2