Decon wheel E-Drive, Etac Prio Montageanleitung Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Wheelchair Decon wheel E-Drive, Etac Prio herunter. Decon wheel E-Drive, Etac Prio 6 Seiten.

Seite drucken
12
10
3. Mount the bracket as shown in the pictures above. Pictures shows the mounting on the
right-hand side. Start by removing the original Hub Sleeve and plastic insert.
Use the supplied mounting tool (12) to bring down the spacer (10) to the desired hole in
the wheelchair. Mount the Cover (11). Check in the Etac user manual how to position
the Hub Sleeve to get the desired seating height.
Parts for assembly on one side.
Item No.
Part Number
1
MED2000
2
XSM16M
3
XSM8ML
4
XSM8X45
5
HW069
6
100 400 007
7
100 400 017
8
XSM16BR3
9
100 400 085
10
100 400 087
11
MED1636
12
MED1637
4. Assemble the back placed battery bag.
NOTE! With E-Drive assembled to the wheelchair it is not possible to equip the wheelchair with Etac:s
cane holder 27327
Tightening torque
20Nm
3
6
2
8
Tightening torque
30Nm. Use threadlock
Loctite 243 when
mounting.
Qty
1
1
1
1
1
1
1
1
1
1
1
1*pair Mounting set
11
10
7
9
Description
Bracket
Nut M16X1 Low
Nut Self-Locking M8
Screw Round M8 x 45
Hub Sleeve M16x1/12,7
Spacer
Spacer
Washer 17x24x1
Spacer
Spacer
Cover
Mounting Tool
If the Hub Sleeve is
mounted in these holes the
angel of the backrest is
limited to 15 degrees.
4
1
10/6/2020
5