IKEA Lagan HGA4K Anleitung Handbuch - Seite 13

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Kochfeld IKEA Lagan HGA4K herunter. IKEA Lagan HGA4K 20 Seiten. Ikea hobs instruction manual
Auch für IKEA Lagan HGA4K: Benutzerhandbuch (16 seiten), Gebrauchsanweisung (24 seiten), Benutzerhandbuch (28 seiten), Gebrauchsanweisung (24 seiten), Gebrauchsanweisung (16 seiten)

Seite drucken

ENGLISH

Gas setting conversion

This model is designed for use with

natural gas but can be converted for

use with butane or propane gas providing

the correct injectors. The injectors not sup-

plied with the appliance have to be or-

dered from After Sales Service (refer to the

Service chapter).

For data concerning injector replacement,

refer to the chapter Technical data

Warning! Conversion or replacement

can only be performed by a registered

installer.

To replace injectors:

1. Remove pan support.

2. Remove burner cap and crown.

3. With a socket spanner 7 unscrew and

remove the injectors, replace them with

the ones required for the type of gas in

use.

4. Reassemble the parts, following the

same procedure backwards.

Important! Replace the rating label (placed

near gas supply pipe) with relevant one for

the new type of gas supply before sealing

the appliance. If the appliance is already

sealed please stick it directly on the user

manual booklet after Technical data

chapter close to the rating plate drawing.

You can find this label in package sup-

plied with appliance

If the feeding gas pressure will be dif-

ferent or variable, comparing with the

required, you must install an appropriate

pressure adjuster, which is not supplied with

the product and if needed must be ordered

separately from the local After Sales Service

(refer to the Service chapter). The pressure

adjuster must be fitted on gas supply pipe,

in compliance with the rules of the force.

The rating plate is located on the lower cas-

ing of the hob.

Adjusting flame level

When hob has been fully installed, it is nec-

essary to check the minimum flame setting:

1. Turn the gas tap to the maximum posi-

tion and ignite.

2. Set the gas tap to the minimum flame

position then turn the control knob from

minimum to maximum several times. If

the flame is unstable or extinguished,

follow the procedure further.

3. Re-ignite the burner and set to mini-

mum.

4. Remove the control knob.

5. To adjust, use a thin bladed screwdriver

and turn the adjustment screw until the

flame is steady and does not extin-

guish, when the knob is turned from

minimum to maximum, and vice versa

(see following picture).

6. Repeat this procedure for all burners.

7. Reassemble the knobs.

Warning! If the appliance is connected

to liquid gas (G31 propane or G30

butane), the regulation screw must be

fastened as tightly as possible.

IKEA of Sweden AB

SE-34381 Älmhult