HIKVISION HiLook Series Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitskamera HIKVISION HiLook Series herunter. HIKVISION HiLook Series 20 Seiten. Smart hybrid light bullet & turret camera
Auch für HIKVISION HiLook Series: Schnellstart-Handbuch (18 seiten), Benutzerhandbuch (18 seiten), Benutzerhandbuch (14 seiten), Benutzerhandbuch (18 seiten), Benutzerhandbuch (13 seiten), Benutzerhandbuch (17 seiten)

Seite drucken
HIKVISION HiLook Series Benutzerhandbuch
Figure 2-15 Dissemble the Camera
9. Secure the mounting base to the ceiling with three
PA4 × 25 screws.
Figure 2-16 Attach the Gang Box to the Ceiling
10. Pull out the clip plate and install the camera back to
the mounting base. Push the clip plate back in to
secure the camera.
11. Connect the power cord and video cable.
12. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure
below.
Tilt Position
[0° to 75°]
1). Rotate the enclosure to adjust the pan position
[0° to 360°].
2). Move the main body up and down to adjust the
tilt position [0° to 75°].
3). Rotate the main body to adjust the rotation
position [0° to 360°].
13. Tighten the screw to finish the installation.
2.2.2 Ceiling Mounting with Junction Box
Before you start:
You need to purchase a junction box in advance.
Steps:
1. Paste the drill template for junction box to the place
where you want to install the camera.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
Figure 2-17 Install the Camera
Pan Position
[0° to 360°]
Figure 2-18 3-Axis Adjustment
Rotation Position
[0° to 360°]