Ganz ZC-D5025NXAT Gebrauchsanweisung - Seite 5

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Sicherheitskamera Ganz ZC-D5025NXAT herunter. Ganz ZC-D5025NXAT 12 Seiten. Mini dome camera

Ganz ZC-D5025NXAT Gebrauchsanweisung

INSTALLATION AND ADJUSTMENT

Attaching the unit
You can use the following three methods to attach the unit. Please use the method
that best fits the conditions of the area in which you want to install the unit.
Attaching to the surface of the ceiling or wall
Use this method to attach the unit to the surface of
the ceiling or wall (page EG- 5 ).
Embedding in the ceiling or wall
Use this method to attach the unit by embedding it
in the ceiling or wall (page EG- 6 ).
Be sure to use the adapter ring to attach the camera.
Attaching to a 4S junction box
Use this method to attach the unit when a 4S junc-
tion box is available (page EG- 7 ).
Be sure to use the adapter ring to attach the camera.
Attaching to the surface of the ceiling or wall
This section explains how to install the unit where cables are running through the
interior of the ceiling or wall. When running cables on the exterior surface of the
ceiling or wall, please drill holes in the ceiling or wall as directed in step 1, then
refer to "Running cables on the exterior surface of the ceiling or wall" (page EG-5).
1
Drilling holes in the ceiling or wall
Use the template included to mark out the position on the ceiling or wall where you
want to install the unit.
When running cables through the interior of the ceiling or wall
Use the template, and drill three holes. Two for screws (Screw A) used to attach
the camera body and one for the cables (Cables).
When running cables on the exterior surface of the ceiling or wall
Use the template, and drill two holes for screws (Screw A) used to attach the
camera body.
2
Attaching the camera body
Remove the body cover, and attach the camera body to the ceiling or wall.
Please use fixing screws suitable for the material of the ceiling or wall when at-
taching the camera body. We recommend using screws with a 4mm diameter.
When you finish attaching the camera, refer to page EG- 7 .
EG-5