KitchenAid KICU569XBL Installationsanleitung Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Kochfeld KitchenAid KICU569XBL herunter. KitchenAid KICU569XBL 16 Seiten. 30" (76.2 cm) and 36" (91.4 cm) electric

Seite drucken

1. Electrical Requirements

Excessive Weight Hazard

Use two or more people to move and install cooktop.

Failure to do so can result in back or other injury.

1. Using 2 or more people, place the cooktop upside down

on a covered surface using the foam end posts from the

packaging.

2. Remove the foam roll from the package containing literature.

Apply foam adhesive-side down around the bottom of the

cooktop glass.

NOTE: The foam helps avoid damage to the underside of the

cooktop glass from debris and helps the cooktop sit flat on

uneven counters.

A. Cooktop base

B. Foam

C. Assembly glass

3. Lower the cooktop into the cutout with the front end of the

cooktop angled down.

4. Make sure that the clips on each side of the cooktop line up

with the brackets in the cutout.

05-Sep-2019 13:08:05 EDT | RELEASED

WARNING

A. Clip

In some European factories the letter "W" of the part code mentioned herein will be automatically

Install Cooktop

5. Push down on cooktop to snap the cooktop clips onto the

brackets installed in the cutout.

6. On the underside of the cooktop, loosen the 4 screws on the

slider.

7. Push the cooktop slider toward the side of the cabinet until

the slider and cabinet touch.

8. Tighten the screws on the slider.

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

A. Induction cooktop

B. Cooktop cutout

A. Side of cabinet

B. Cooktop slider

C. Screw