HIKVISION TURBO HD D0T PIR Series Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitskamera HIKVISION TURBO HD D0T PIR Series herunter. HIKVISION TURBO HD D0T PIR Series 16 Seiten.
Seite drucken
2 χϡϫ͓ππ͓ϫήώχ
Before you start
Make sure that the device in the package is in good
condition and all the assembly parts are included;
Make sure that all the related equipment is power-off
during the installation;
heck the specification of the products for the
installation environment;
heck whether the power supply is matched with
your power output to avoid the damage;
Make sure the wall is strong enough to withstand
three times the weight of the camera, and the
mount;
If the wall is cement, insert expansion bolts before
installing the camera; If the wall is wooden, use
self-tapping screws to secure the camera;
If the product does not function properly, contact
your dealer or the nearest service center; Do NOT
disassemble the camera for repair or maintenance by
yourself;
2.1
Installation of Type I Camera
2.1.1 C
eiling/Wall Mounting without Junction Box
Steps:
1. Paste
wh
ere you want to install the camera;
2. D
rill the screw holes and the cable hole (optional) in
the
ceiling/wall according to the drill template;
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable.
3. !ttach the bracket to the ceiling/wall, and secure
the camera with supplied screws;
Figure 2-2 Fix the amera to the eiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
Available from A1 Security Cameras
w.a1securitycameras.com email: sales@a1securitycamera
the drill template (supplied) to the place
Screw Hole
Screw Hole
Template
Side Opening
Figure 2-1 Drill Template
Ø 55 mm
Screw Hole
( 2.17" )
Ø 68 mm
( 2.68" )
Ø 18 mm
( 2.68" )