HIKVISION TURBO HD DS-2CE56D5T Benutzerhandbuch

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitskamera HIKVISION TURBO HD DS-2CE56D5T herunter. HIKVISION TURBO HD DS-2CE56D5T 2 Seiten. 1080p dome camera
Auch für HIKVISION TURBO HD DS-2CE56D5T: Benutzerhandbuch (2 seiten)

Seite drucken

TURBO HD

1080P Dome Camera

User Manual

UD.6L0201D1548A01

Thank you for purchasing our product. If there

are any questions, or requests, please do not

hesitate to contact the dealer.

This manual applies to DS-2CE56D5T-(A)VFIR and

DS-2CE56D5T-(A)VPIR3.

This manual may contain several technical

incorrect places or printing errors, and the

content is subject to change without notice.

The updates will be added to the new version of

this manual. We will readily improve or update

the products or procedures described in the

manual.

DISCLAIMER STATEMENT

)

Underwriters Laboratories Inc. ("UL" has not

tested the performance or reliability of the

security or signaling aspects of this product.

UL has only tested for fire, shock or casualty

hazards as outlined in Ul's Standard(s) for Safety,

UL60950-1. UL Certification does not cover the

performance or reliability of the security or

signaling aspects of this product. UL MAKES NO

REPRESENTATIONS, WARRANTIES OR

CERTIFICATIONS WHATSOEVER REGARDING

0100001040603

THE PERFORMANCE OR RELIABILITY OF ANY

SECURITY OR SIGNALING RELATED FUNCTIONS

OF THIS PRODUCT.

Regulatory Information

FCC Information

FCC compliance: This equipment has been

tested and found to comply with the limits for a

digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference when the equipment is operated in

a commercial environment. This equipment

generates, uses, and can radiate radio

frequency energy and, if not installed and used

in accordance with the instruction manual, may

cause harmful interference to radio

communications. Operation of this equipment in

a residential area is likely to cause harmful

interference in which case the user will be

required to correct the interference at his own

expense.

FCC Conditions

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful

interference.

2. This device must accept any interference

received, including interference that may

cause undesired operation.

EU Conformity Statement

This product and - if applicable - the

supplied accessories too are marked

with "CE" and comply therefore with

the applicable harmonized European

standards listed under the Low Voltage Directive

2006/95/EC, the EMC Directive 2004/108/EC,

the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive):

Products marked with this symbol

cannot be disposed of as unsorted

municipal waste in the European

Union. For proper recycling, return

this product to your local supplier

upon the purchase of equivalent new equipment,

or dispose of it at designated collection points.

For more information see:

www.recyclethis.info.

2006/66/EC (battery directive):

This product contains a battery that

cannot be disposed of as unsorted

municipal waste in the European

Union.

See the product documentation for specific

battery information. The battery is marked with

this symbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg).

For proper recycling, return the battery to your

supplier or to a designated collection point. For

more information see: www.recyclethis.info.

1 Introduction

1.1 Product Features

This camera adopts new generation sensor with

high sensitivity and advanced circuit board design

technology. It possesses the features of high

resolution, low distortion, and low noise, etc. It is

extremely suitable for supervisory system and

image processing system.

The main features are as follows:

High performance CMOS sensor and high

resolution bring high-quality image;

Low illumination;

Support IR cut filter with auto switch;

OSD menu, parameters are configurable;

Support auto white balance, auto gain control,

electronic shutter control and internal

synchronization;

SMART IR mode;

Unit transmission control;

Advanced 3-axis design meets different

installation requirements.

1.2 Overview

1.2.1 Overview of Type I Dome Camera

Power Cable

Lens

HD Video Cable

CVBS Cable

Black Liner

Dip Switch

Auxiliary Video Output

Back Box

Bubble

Figure 1-1 Overview of Type I Dome Camera

1.2.2 Overview of Type Dome Camera

Power Cable

Black Liner

Lens

CVBS Cable

HD Video Cable

Dip Switch

Base plate

Bubble

Auxiliary Video Output

Figure 1-2 Overview of Type Dome Camera

2 Installation

Before you start:

Please make sure that the device in the package

is in good condition and all the assembly parts

are included.

Make sure that all the related equipment is

power-off during the installation.

Check the specification of the products for the

installation environment.

Check whether the power supply is matched

with your power output to avoid damage.

Please make sure the wall is strong enough to

withstand three times the weight of the camera

and the mounting.

If the wall is the cement wall, you need to insert

expansion screws before you install the camera.

If the wall is the wooden wall, you can use

self-tapping screw to secure the camera.

If the product does not function properly,

please contact your dealer or the nearest

service center. Do not disassemble the camera

for repair or maintenance by yourself.

2.1 Ceiling Mounting

Steps:

1.Drill the screw holes and the cable hole on the

ceiling according to the supplied drill template.

Type I:

Type I : I

Figure 2-1 The Drill Template

2 Loosen the screws on the bubble of type 1

camera /rotate the bubble of type2 camera to

remove the bubble and the black liner.

Type I:

Type I : I

Figure 2-2 Remove the Bubble