HIKVISION TURBO HD DS-2CE56H5T-ITMEB Benutzerhandbuch - Seite 11
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitskamera HIKVISION TURBO HD DS-2CE56H5T-ITMEB herunter. HIKVISION TURBO HD DS-2CE56H5T-ITMEB 17 Seiten. Turret & dome camera
Seite drucken
4. Fix the mounting base on the ceiling with supplied
screws.
5. Route the cables through the cable hole, or the side
opening.
6. Connect the corresponding cables, such as power
cord, and network cable.
7. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle
0° to 75°
Figure 2-22 Type I Camera 2-Axis Adjustment
1). Loosen the tilt adjusting screw to adjust the tilt
position [0° to 75°].
2). Hold the black liner to adjust the pan position [0°
to 355°].
3). Hold the camera body to adjust the rotation
position [0° to 355°].
8. Reinstall the bubble, and tighten the screws.
Figure 2-20 Remove the Bubble
Figure 2-21 Fix the Mounting Base
Figure 2-23 Bubble Reinstallation
0° to 355°
Adjusting Screw
0° to 355°