Briteq BEAMSPOT1-DMX WW Betriebshandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Beleuchtungsanlagen Briteq BEAMSPOT1-DMX WW herunter. Briteq BEAMSPOT1-DMX WW 12 Seiten.

Seite drucken

ENGLISH

 Use ▲/▼buttons to select the desired mode:

 [1CH]: master dimmer

 [2CH]: master dimmer + strobe

 Once the correct option shows on the display, press the [ENTER] button to save it.

Remark: on RDM-compatible controllers this option can also be remotely set.

SLAVE MODE

Used to set the projector as slave in a master/slave setup.

 Press the [MENU] button or ▲/▼buttons until the desired function is showing on the display.

 Press the [ENTER] button

MASTER DIM

Used to set the master dimmer while used as master.

 Press the [MENU] button or ▲/▼buttons until the desired function is showing on the display.

 Press the [ENTER] button: the values can be changed

 Use ▲/▼buttons to select the desired level for the master dimmer. (please note that the last selected

static color will be used to set the value)

 Once you have the desired level, press the [ENTER] button to save it.

Note: the setting of this option has NO effect while the projector is used as SLAVE or in DMX-mode.

DIMMER CURVE

Used to set the dimmer curve of the master dimmer.

 Press the [MENU] button or ▲/▼buttons until the desired function is showing on the display.

 Press the [ENTER] button: the values can be changed

 Use ▲/▼buttons to selected the desired curve:

 Once you have the desired curve, press the [ENTER] button to save it.

LAMP BEHAVIOR

Used to select the reaction time of the projector.

 Press the [MENU] button or ▲/▼buttons until the desired function is showing on the display.

 Press the [ENTER] button: the values can be changed

 Use ▲/▼buttons to select the desired mode:

 [LED]

 [HALOGEN]

 Once the correct option shows on the display, press the [ENTER] button to save it.

LOCK MENU

Used to lock the setup menu against unwanted altering of the settings.

 Press the [MENU] button or ▲/▼buttons until the desired function is showing on the display.

 Press the [ENTER] button: the values can be changed

 Use ▲/▼buttons to select the desired mode:

 [OFF]

The setup menu can be used at any time.

 [ON]

After a short time the setup menu locks automatically, the display shows [LOCKED *****].

Unlock the display by pressing the buttons in this order: UP, DOWN, UP, DOWN, ENTER.

 Once the correct option shows on the display, press the [ENTER] button to save it.

BRITEQ

The projector follows the instructions instantly, no delay.

The projector imitates the behavior of a halogen lamp (slower reaction time).

5/9

BEAMSPOT1-DMX NW (WW)

OPERATION MANUAL