KitchenAid KDTE234GPS Gebrauchsanweisung - Seite 12
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Geschirrspüler KitchenAid KDTE234GPS herunter. KitchenAid KDTE234GPS 17 Seiten.
Seite drucken
Using the Bottle Wash feature (on some models)
Up to three sports bottles, baby bottles or other narrow items
may be washed in the upper rack with this feature.
To wash bottles:
1. Select BOTTLE WASH on the control panel.
2. Flip up any or all three of the nozzles just far enough to t
inside your particular item.
3. Securely place items over the nozzles.
Your dishwasher has the latest technology in dishwasher ltration. This ltration system minimizes sound and optimizes water and
energy conservation while providing superior cleaning.
The lter system consists of two parts, an upper lter assembly and a lower lter.
IMPORTANT: To avoid damage to dishwasher, do not operate your dishwasher
without lters properly installed. Be sure lower lter is securely in place and upper
lter assembly is locked into place. If upper assembly turns freely, it is not locked
into place.
The lters may need to be cleaned when:
Visible objects or soils are on the upper lter assembly.
I
Dishes feel gritty to the touch.
I
It is very easy to remove and maintain the lters. The chart below shows the recommended cleaning frequency.
Number of Loads
Per Week
8–12
4–7
1–3
*Scrape excess food into the trash or food disposer prior to loading the dishwasher. We recommend this practice because it will
conserve the water and energy that you would have used to prepare your dishes. This will also save you time and effort.
Very Hard Water
If you have hard water (above 15 grains), clean your lter at least
once per month. Buildup of white residue on your dishwasher
indicates hard water. For tips on removing spots and stains, see
the "Troubleshooting" section.
12
RECOMMENDED TIME INTERVAL TO CLEAN YOUR FILTER
If you only scrape
before loading*
Every 2 months
Every 4 months
Twice per year
B
A. Water flows through these holes when the nozzle is flipped down.
B. Water flows through these holes when the nozzle is flipped up.
When you do not need to wash bottles, ip the nozzles down until
they stop.
Filtration System
If you scrape and rinse
before loading
Every 4 months
Once per year
Once per year
Filter Removal Instructions
1. Turn the upper lter assembly a quarter turn counterclockwise
and lift out.
2. Separate the upper lter assembly by gently pulling apart.
3. Clean the lters as shown.
A
Upper filter
assembly
If you wash before loading
Once per year
Once per year
Once per year
Locating tab
To remove upper filter assembly
Lower filter