Berner AC10 Handbuch für Installation und Wartung - Seite 10
Blättern Sie online oder laden Sie pdf Handbuch für Installation und Wartung für Heizgerät Berner AC10 herunter. Berner AC10 16 Seiten. Architectural contour air curtain
Seite drucken
QUICK START INSTRUCTIONS
For your Berner Air Curtain with Intelliswitch™ Gen4
NOTE – to navigate, use
+
use
to change setting,
then press
Stop: Immediately stops the air curtain and changes mode to OFF
"i": info button provides controller status and diagnostic data
Mode/Fan Speed:
Mode: Select your mode of operation (see next page)
Fan Speed: Sets the fan speed
Delay Time: Sets the amount of time the air curtain runs after the door closes
Temp Set: Sets the temperature the air curtain will maintain (heated units only)
Start Time: Programs the time of day the air curtain becomes active
Stop Time: Programs the time of day the air curtain stops running
Set Time/Day: Sets the clock time and day (used by programming)
Locked: Unit will run as programmed but settings cannot be changed
NOTE: Start/Stop time must be the same for the air curtain to operate continuously.
If your air curtain unit is in "Locked" mode when you receive it:
Press and hold the
www.berner.com
www.Berner.com/intelliswitch
to select setting
to enter the setting.
IMPORTANT NOTE!
+
for 5 seconds to unlock.
Berner International
111 Progress Ave. / New Castle / PA / 16101 / USA
-10-
800.245.4455