KitchenAid KDTM354DSS Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Geschirrspüler KitchenAid KDTM354DSS herunter. KitchenAid KDTM354DSS 17 Seiten.

Seite drucken

OPTIONS

Lower jets clean pans, casseroles, etc., with

tough food soil to eliminate the need for

soaking and scrubbing of dirty, baked-on

dishes.

Raises the main wash temperature to

improve cleaning for loads containing tough,

baked-on food.

Sanitizes dishes and glassware in

accordance with NSF International NSF/

ANSI Standard 184 for Residential

Dishwashers. Certified residential

dishwashers are not intended for licensed

food establishments. The Sani indicator

indicates at the end of the cycle whether the

Sani Rinse option was successfully

completed. If the indicator is not activated, it

is probably due to the cycle being

interrupted.

For added convenience, use for washing a

small load of dishes in the top rack to help

keep the kitchen continuously clean.

Runs the dishwasher at a later time or during

off-peak electrical hours. Select a wash cycle

and options. Press the Delay button. Press

START/RESUME. Close the door firmly.

NOTE: Anytime the door is opened (such as,

to add a dish), the Start/Resume button must

be pressed again to resume the delay

countdown.

OPTIONS

Avoids unintended use of the dishwasher between cycles, or cycle and option changes during a cycle.

To turn on Lock, press and hold TOP RACK ONLY for 3 seconds. The Control Lock light will stay on for a short time, indicating that

it is activated, and all buttons are disabled. If you press any button while your dishwasher is locked, the light flashes 3 times. The

dishwasher door can still be opened/closed while the controls are locked.

NOTE: You may need to disable Sleep Mode by pressing either START/RESUME or CANCEL/DRAIN, or by opening and closing

the door before you are able to turn Control Lock off.

To turn off Control Lock, press and hold TOP RACK ONLY for 3 seconds. The light turns off.

NOTE: If your model requires you to press and hold TOP RACK ONLY to lock the controls, the Control Lock LED will be on or off

to indicate whether Control Lock is active or not.

Control

To start or resume a

wash cycle

Purpose

If the door is opened during a cycle or the power is interrupted, the Start/Resume indicator

flashes. The cycle will not resume until the door is closed and START/RESUME is pressed.

NOTE: If the Start/Resume button is located on top of door, push door firmly closed within

3 seconds of pressing START/RESUME. If the door is not closed within 3 seconds, the Start/

Resume button LED will flash, an audible tone will be heard, and the cycle will not start.

CAN BE

WHAT IT DOES

SELECTED

WITH

Tough

Activates the

ProScrub

spray jets

Normal

to provide intensified

ProWash™

cleaning power to

Top Rack

specific wash areas.

Only

Tough

Raises the main

wash temperate

Normal

from 105°F (41°C) to

ProWash™

either 130°F (55°C)

or 140°F (60°C).

Tough

Increases the main

wash temperature

Normal

from 105°F (41°C) to

ProWash™

140°F (60°C) and

the final rinse from

140°F (60°C) to

155°F (68°C).

Available

Slightly faster wash

with any

for smaller loads

cycle

Available

Delays the start of a

with any

cycle to the

cycle

specified time

WHAT IT DOES

Comments

ADDED TIME TO CYCLE

TYPICAL

MAX

- 3

240

ADDED

WATER

GALLONS

(LITERS)

0 - 1.5

(0 - 5.7)

0 - 1.5

(0 - 5.7)

0 - 1.5

(0 - 5.7)

-40

480