GAO 552446 Betriebsanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Zeitschaltuhr GAO 552446 herunter. GAO 552446 3 Seiten. Digital day switch timer with light

Seite drucken

Countdown Mode

In the countdown mode, a time of maximal 99 hours, 59 minutes, 59 seconds can be set.

Depending on the operating mode of the weekday switch timer, the device is switched off or on

after the timer has counted down.

☞

Operating mode "ON" or "AUTO ON" (mains socket/device is switched on): The

connected device is switched off after the timer has counted down

Operating mode "OFF" or "AUTO OFF" (mains socket/device is switched off): The

connected device is switched on after the timer has counted down

When the countdown mode was started, all automatic switching programs are deactivated

for the duration of the countdown! That means that the device is not switched on or of at

the times and weekdays programmed in the program group until the timer has counted

down.

Setting the timer and start of the countdown timer:

  I n the time mode, press the "MENU" button 2x until the symbol "CTD" appears on the bottom

right and the hours of the timer ﬂ ash "0:00:00".

  S et the hours of the countdown timer with the "+1" or "-1" button (keep the respective button

pressed down for quick setting).

Press the "OK" button brieﬂ y to conﬁ rm.

  T he minutes of the countdown timer starts ﬂ ashing; set the minutes with the "+1" or "-1"

button (keep the respective button pressed down for quick setting).

Press the "OK" button brieﬂ y to conﬁ rm.

  T he seconds of the countdown timer start ﬂ ashing; set the seconds with the "+1" or "-1"

button (keep the respective button pressed down for quick setting).

  T he countdown timer is started by pressing the "OK" button brieﬂ y.

  When the timer has counted down (at 0:00:00), the front socket and the device connected to

it is switched on or off.

☞

When the weekday switch timer is in "ON" or "AUTO ON" mode (socket/device is

switched on), the connected device is switched off when the timer has counted

down.

When the weekday switch timer is in "OFF" or "AUTO OFF" mode (socket/device

is switched off), the connected device is switched on when the timer has counted

down.

Early termination of the countdown timer:

  I f the countdown timer is to be terminated early, press the "MENU" button several times until

the timer is shown in the display.

☞

The countdown timer cannot be reset as long as the weekday switch timer

shows the time or the programmed switching times!

  P ress the counter-sunk "RCL" button brieﬂ y e.g. with a toothpick.

The countdown timer is then reset to "0:00:00", the hours of the timer ﬂ ash again (you can

now set a new time and restart the countdown timer as described above).

  P ress the "MENU" button brieﬂ y to leave the setting mode and to return to the time display.

Alternatively, do not press any button for 2 minutes.

This deactivates the countdown timer and the weekday switch timer continues with its normal

switching program.

Random function

With the random function, the set switch on/off times are delayed by 4 to 32 minutes.

☞

The random function can only be used for program times of the program groups,

but not for the countdown timer.

To turn the random function on or off, press the "-1" button brieﬂ y.

When the random function is turned on "RND" is ﬂ ashing on the bottom right in the display.

Reset

In order to reset the weekday switch timer to the factory settings and to delete all programming,

keep the countersunk "RST" button pressed for several seconds. All display segments are

shown in the display, then the weekday switch timer is ready for operation.

☞

Note:

All settings and programming are lost upon reset!

Activating the lighting of the LC display/night light function

Use the "

" button to switch the display light on or off.

The light can also be used as night light due to its large size and brightness.

Maintenance and Cleaning

  T he product does not require maintenance. The product contains no parts that require servi-

cing. Therefore, do not open/dismantle it. Maintenance or repairs may only be performed by

qualiﬁ ed personnel or a specialised repair shop.

  Before cleaning, disconnect the weekday switch timer from the power supply. To do this,

pull it completely out of the mains socket (the wall socket). All settings are saved due to the

integrated NiMH battery.

  Use a clean, dry, soft cloth for cleaning. Do not press too hard on the display; this can lead to

scratches and could also cause damage to the display and touchscreen!

  Dust can easily be removed using a clean, soft and long-bristled brush and a vacuum cleaner.

Do not use abrasive cleaning agents, cleaning alcohol or other chemical solutions,

since these could damage the housing or even impair operation.

Disposal

Dispose of the unserviceable product according to the relevant statutory regulations!

Technical Data

Operating voltage ................. 230 V/AC, 50 Hz

Switching capacity ................ max. 3680 W

Protection class .................... I

Model: ................................... Relay; 1-pole disconnection

Child-proof lock ..................... yes, integrated in socket

Switch times per day ............ 16 on/off programs

Shortest switching duration .. 1 min

Countdown timer .................. 1 min to a max. of 99 h, 59 min, 59 s

Data storage ......................... with an internal NiMH battery (max. approx. 10 months with fully

charged battery)

Ambient temperature ............ 0 °C to +40 °C

Ambient humidity .................. 0% to 90% relative humidity, not condensing

Dimensions ........................... 70.5 x 132 x 37 mm (W x H x D, without plug)

Weight .................................. 200 g