IKEA VAPPEBY Handbuch - Seite 12

Blättern Sie online oder laden Sie pdf Handbuch für Heimbeleuchtung IKEA VAPPEBY herunter. IKEA VAPPEBY 36 Seiten.
Auch für IKEA VAPPEBY: Handbuch (32 seiten), Handbuch (28 seiten), Handbuch (36 seiten)

Seite drucken

The speaker will enter Bluetooth pairing mode

automatically the first time it is powered on, and any

time that a previously paired device cannot be found.

Factory reset

To remove previous Bluetooth pairings, reset the

speaker by pressing and holding the button (1) for more

than 5 seconds. Successful factory reset is confirmed by

the LED flashing red and with an audible sound.

Alternatively, go to the Bluetooth menu on your source

device and unpair.

Stereo pairing:

Two VAPPEBY Portables can be stereo paired:

1. M ake sure both speakers are in Bluetooth search

mode.

2. D ouble-press the power button on one of the

speakers. A sound will confirm successful stereo

pairing.

3. C onnect to the source device by following the

Bluetooth pairing instructions.

Good to know

• The speaker is suitable for outdoor use, protected

against dust and water according to IP67.

• If the speaker's front protection is soaked with water,

acoustic performance may be affected temporarily, but

it will go back to normal once the water is gone.

• Devices and the battery may get warm during

charging. This is completely normal, and they will

gradually cool down again after they are fully charged.