HIKVISION DS-2CE12UF3T-E Benutzerhandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für DVR HIKVISION DS-2CE12UF3T-E herunter. HIKVISION DS-2CE12UF3T-E 18 Seiten. 4k colorvu poc camera
Auch für HIKVISION DS-2CE12UF3T-E: Schnellstart-Handbuch (17 seiten)
Seite drucken
9. Repeat steps 6 to 7 of 2.2.1 Ceiling/Wall Mounting
Without Junction Box to finish the installation.
2.2
Installation of Type II Camera
2.2.1 Ceiling/Wall Mounting Without Junction Box
Before you start:
Ceiling mounting and wall mounting are similar.
Following steps take ceiling mounting as an example.
Note:
For installation with junction box, refer to 2.1.2
Ceiling/Wall Mounting with Junction Box.
Steps:
1. Paste the drill template (supplied) to the place
where you want to install the camera.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
3. (Optional) Drill the cable hole, when the cables are
routed through the ceiling.
4. Align the screw holes in the bracket to the ceiling,
and secure the camera with three PA4 × 25 screws
(supplied).
Figure 2-9 Secure Camera to Ceiling
5. Connect the power cord and video cable.
6. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, turn the trim ring counterclockwise to loosen it
and adjust the positions according to the figure
below.
Rotation Position
[0° to 360°]
7. Turn the trim ring clockwise to lock the positions.
Figure 2-8 Drill Template
Figure 2-10 3-Axis Adjustment
Screw Hole
Screw Hole
Screw Hole
templat e
4
Pan Position
[0° to 360°]
Trim Ring
Tilt Position
[0° to 90°]