Avantco 193MAC26HCB Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kommerzielle Lebensmittelausrüstung Avantco 193MAC26HCB herunter. Avantco 193MAC26HCB 10 Seiten. Vertical open air merchandisers (macs)
Seite drucken
Installation
Please read this manual thoroughly prior to equipment setup, operation, and maintenance.
This unit is intended for use in a temperature-controlled environment less than 75ºF and
55% relative humidity. Malfunction due to improper conditions is not covered under warranty.
IMPORTANT –
Please Read Before Installation:
•
If the unit has recently been transported on its side, please let the unit stand upright for a minimum of
24 hours before plugging it in.
•
Make sure the unit has reached the desired temperature before loading the unit with products.
This unit is meant for keeping cold products cold, not chilling warm products.
•
Make sure all accessories are installed (shelves, shelf clips, etc.) before plugging in the unit.
•
Do not attempt to remove or repair any component of the unit. Consult an authorized service technician
for servicing / repair.
•
Do not stand inside the unit.
•
Please read through this manual in its entirety.
•
This refrigerator is designed to perform in a temperature-controlled environment at 55% relative
humidity. The unit should be located away from doors, air ducts, and fans that could disrupt air flow
and negatively impact performance.
Cabinet Location Guidelines
•
Install the unit on a strong and leveled surface.
- If the surface is uneven, the unit may be noisy.
- The unit may malfunction if the surface is uneven.
•
Install the unit in an indoor, well ventilated area away from doors, air ducts, and fans.
- For best performance, maintain 6" of clearance on the back of the unit at all times.
- Do not use outdoors. For indoor use only.
- Avoid direct sunlight.
•
Avoid installation in a high humidity and / or dusty area.
- High humidity can cause the unit to rust and may decrease efficiency.
- Dust collected on the condenser coil may cause unit to malfunction.
- Malfunction due to high ambient temperatures, humidity, or improperly maintained condenser coil
will void the warranty.
•
Select a location away from heat and moisture-generating equipment.
- High ambient temperatures may cause the compressor to malfunction.
- Malfunction due to high ambient temperatures and humidity will void the warranty.
Position the merchandiser at its final location before removing the shipping skid. There are four bolts at
the bottom of the merchandiser that secure the shipping skid. Keep the unit lifted, remove all four bolts
to remove the skid.
www.AvantcoRefrigeration.com
4
User Manual
Vertical Open Air Merchandisers