AFS AFS5001-2CTX Anweisungen für Installation und Betrieb - Seite 7
Blättern Sie online oder laden Sie pdf Anweisungen für Installation und Betrieb für Sende- und Empfangsgerät AFS AFS5001-2CTX herunter. AFS AFS5001-2CTX 15 Seiten. Afs5001 series fiber optic video & data & ethernet transmission system 1-ch video bi-directional data 10/100 mbps ethernet transceiver
Seite drucken1-Ch. 8 BIT DIGITAL VIDEO + BI-DIRECTIONAL DATA + 10/100MBPS ETHERNET ON 1 FIBER
5.0 Installation
The ALBA FIBER SYSTEMS Series AFS5001 products are interchangeable between Standalone
and Rackmount. Cards units occupy two slots in Alba's standard 19"x4U chassis series AFS940-1
with one power supply (total 9 cards) or ASF940-2 with 2 power supplies (total 8 cards). To
install card and power supply, keep the orientation of Alba logo on top and slide onto the top
and bottom card guides in the chassis. Press securely on the top and bottom of the card to
ensure that it is fully seated so that the electrical connector mates with the chassis-mounted
motherboard. Once installed, manually tighten the two thumbscrews located at the top and
bottom of the card. Do not use tools to secure these and do not over tighten.
6.0 Product Signal Format & Specifications
The tables below identify the specifications for the various signals that these fiber units
transmit / receive.
CONNECTORS
Optical
Power
Video
Data
Ethernet
OPTICAL PARAMETERS
Fiber
Wavelengths (SM)
Wavelengths (MM)
Alba Fiber Systems Inc. Specifications are subject to change without notice. Page 7 9/27/12
www.albafiber.net
ST (MM), FC (SM)
Terminal Block
BNC (Gold Plated Center-Pin)
Terminal Block
RJ-45
Single-mode or Multi-mode
1310/1550nm
1310/1550nm
Series AFS5001