GREEN TECHNOLOGY GTS 1300 Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Handbuch für Chipper GREEN TECHNOLOGY GTS 1300 herunter. GREEN TECHNOLOGY GTS 1300 11 Seiten. Woodchipper

1.6. P ieces jamming the input tube can only be removed safely

when the engine is stopped, the spark plug cap removed

and the rotor is stopped and blocked. If necessary, unbolt

and tip the input and output tubes to facilitate access to the

rotor. Use a wooden pole to remove pieces stuck in the rotor.

Never use your hands. (fig. 6 - 8)

1.7.

Never leave the machine running unattended.

1.8.

Changing the blades of the rotor or the counter blade and

checking blade bolts should only be done when the engine

and rotor are stopped, the spark plug cap is removed and the

rotor is blocked.

1.9.

After one hour of use always check that all bolts and nuts are

still tightened properly. If not, tighten them again or bring the

machine back to your dealer/service-point.

1.10. U se only original Green Technology parts for maintaining

your shredder, otherwise the warranty will be void.

1.11. The shredder can only be repaired by a skilled dealer/

service-point.

1.12. The shredder exceeds 90 dBA during operation. Therefore all

users and onlookers must wear ear-protection.

1.13 B efore use, make secure that the bolts on the fixed blade are

firmly fixed. Use a torque wrench to tighten the bolts; 70Nm

for the blades on the rotor and 40Nm for the counter blade.

Use Loctite 243. Check after one hour that the bolts still are

firmly fixed (just the first time; also after maintenance check).

Manual Chipper GTS 1300

fig. 5

fig. 7

Manual Chipper GTS 1300

fig. 6

fig. 8