Makita 0088381760386 Gebrauchsanweisung - Seite 7

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Elektrowerkzeug Makita 0088381760386 herunter. Makita 0088381760386 11 Seiten. Cordless heat gun

Seite drucken

WARNING:

Do not touch the accessory

attached to or ejected from the heat gun imme-

diately after use. Do not eject the accessory to

any person or animal. The nozzle attachment gets

extremely hot after use and cause risk burn injury.

WARNING:

Do not eject the accessory to any

surface that is flammable or easy to be melt. The

nozzle attachment gets extremely hot after use and

cause risk of fire or melting the surface.

WARNING:

Use the identical accessories

included in the original package or serviced by

the dealer or service center. Use wrong or defective

accessory may cause the hot air to flow backward

and damage the tool and create a hazard.

Installing or removing battery

cartridge

CAUTION:

Always switch off the tool before

installing or removing of the battery cartridge.

CAUTION:

Hold the tool and the battery car-

tridge firmly when installing or removing battery

cartridge. Failure to hold the tool and the battery

cartridge firmly may cause them to slip off your hands

and result in damage to the tool and battery cartridge

and a personal injury.

Fig.3

► 1. Red indicator 2. Button 3. Battery cartridge

To remove the battery cartridge, slide it from the tool

while sliding the button on the front of the cartridge.

To install the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place. Insert it all the way until it locks in place

with a little click. If you can see the red indicator as

shown in the figure, it is not locked completely.

CAUTION:

Always install the battery cartridge

fully until the red indicator cannot be seen. If not,

it may accidentally fall out of the tool, causing injury to

you or someone around you.

CAUTION:

Do not install the battery cartridge

forcibly. If the cartridge does not slide in easily, it is

not being inserted correctly.

OPERATION

NOTE: At first use of the heat gun, some smoke may

emit from the nozzle. This is normal and will soon

decrease.

Switching On and Off

Switching On

—

Pull the lock off lever downwards and pull in the

switch trigger to switch on tool.

—

Press in the lock on button on the left with your

thumb to keep the tool running.

Switching Off

—

Release the switch trigger to stop.

—

To stop the tool from the locked position, pull the

switch trigger fully to unlock. Release the switch

trigger to stop.

Fig.4

► 1. Lock off lever 2. Switch trigger 3. Lock on button

Temperature setting (DHG181)

The temperature is adjustable by turning the tempera-

ture dial. The dial is marked 1 (lowest temperature) to 6

(highest temperature).

Adjust to suitable temperature for your applications.

The following table suggests setting for different

applications.

(Ambient temperature)

7 ENGLISH

Setting

Cooling the hot parts.

Cooling the machines before

changing the nozzle.

2 - 6

Drying paint and varnish.

Removing stickers.

Waxing and de-waxing.

Shrinking PVC wrapping and

insulation tubes.

Thawing frozen pipes.

Welding plastics.

Bending plastic pipes and

sheets.

Applications