Avantco 177MX30H Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Mischpult Avantco 177MX30H herunter. Avantco 177MX30H 12 Seiten. Gear driven 30 qt. commercial mixer

Seite drucken
Avantco 177MX30H Benutzerhandbuch

REMOVAL AND REFITTING INSTRUCTIONS MIXER SAFETY GUARD

1. To remove the wire guard adjust the position to align the edge of the wire guard with the single indentation marker on the
fixed rear guard. See figure 1.
2. Remove the rubber closing caps from the mounting screws as in the indicated positions. Remove the screws. See figure 2
and 3.
3. Turn the wire guard until the edge of the wire aligns with two indentation markers on the fixed rear guard. See figure 4.
4. Remove the cap and mounting screw in the indicated position. See figure 5.
5. Ensure that all rubber caps are fitted properly into the screw heads. See figure 6.
6. To replace the wire guard after cleaning repeat the instructions above in reverse.
www.AvantcoEquipment.com
Figure 1
Figure 2
Figure 4
Figure 6
User Manual
Figure 3
Figure 5
5