CORNING 6780-4 Gebrauchsanweisung - Seite 6
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Laborausrüstung CORNING 6780-4 herunter. CORNING 6780-4 13 Seiten. Digital microplate and orbital shakers
Seite drucken
CORNING
LSE
DIGITAL MICROPLATE AND ORBITAL SHAKERS
POWER
Time signal light is on. By rotating the encoder right (+) or left (-) the set time can be selected
from 30 sec to 99 min 50 sec :
POWER
If you want to set the timer to hold – turn the knob left or right until HLd is displayed. You can
reach the HLd function by setting to under 0.30 or above 99.5
Push down on the encoder knob to switch modes between time set mode and RPM set mode.
POWER
RPM signal light is on. By rotating the encoder right (+) or left (-) the desired RPM can be
selected :
Press START/STOP button to start operation
RUN
TIME
RPM
Push
Time/RPM
nx10 (RPM)
t (min)
99.5 99 min 50 sec
9.59 9 min 59 sec
0.30 30 sec
RUN
TIME
RPM
Push
Time/RPM
nx10 (RPM)
t (min)
RUN
TIME
RPM
Push
Time/RPM
nx10 (RPM)
t (min)
34 340 Rpm
120 1200 Rpm
6
USER'S MANUAL