CORNING 6795-611 Gebrauchsanweisung - Seite 4

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Laborausrüstung CORNING 6795-611 herunter. CORNING 6795-611 8 Seiten. Stirrer

Product Damage

Keep top surface clean.

Do not immerse unit for cleaning. Wipe down with a damp cloth.

Do not modify ground power plug. Use only properly grounded outlets to

avoid shock hazard.

Use appropriate hand and eye protection when handling hazardous

chemicals. Gross weight of items placed on top of the stirrer should not

exceed 100 lbs. Use proper lifting techniques when transferring vessels to

and from the stirrer.

Personal injury or product damage may result if the stirrer is modified in

any way.

These units are not explosion or spark-proof.

Do not stir volatile or flammable materials.

Do not operate this product near volatile or flammable materials.

Do not modify the stirrer electrically or mechanically without Corning's

written approval.

Use only with heavy wall (min. 2.5 mm thickness) vessels. If used with

non-heavy vessels (less than 2.5 mm thickness) breakage may occur as

a result of the stir bar decoupling.

2.0 Operating Conditions

The PC-611 is designed to be safe when used under the following conditions:

Indoor use

Altitude up to 2,000 meters

Temperature of 0°C to 40°C

Product should be placed on a flat surface at least 12 in. (30.5 cm) from

walls, 48 in. (122 cm) from ceilings, and 12 in. (30.5 cm) from other stirrers

if using multiple units.

Maximum relative humidity of 80% for temperatures up to 31°C

decreasing linearly to 50% relative humidity at 40°C.

Main supply voltage fluctuations not to exceed ±10% of the nominal

voltage.

Installation Category II: Product is designed for connection to an electrical

branch circuit inside a building with main supply voltage fluctuations not

exceeding ±10% of the nominal voltage.

Pollution Degree 2: Any foreign matter that may accumulate on or within

the product during normal use is not electrically conductive.

CORNING PC-611 STIRRER