CORNING LSE 6876-SB Gebrauchsanweisung - Seite 9

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Laborausrüstung CORNING LSE 6876-SB herunter. CORNING LSE 6876-SB 12 Seiten. Digital dry bath heater

Seite drucken

10.0 Cleaning and Maintenance

Make sure that the Corning® LSE™ Digital Dry Bath Heater and block are

cool and the power cord is disconnected before performing any cleaning

or maintenance. Repair or maintenance should only be performed by an

authorized service technician.

The dry bath may be cleaned with a moist cloth containing a mild soap

solution. Do not immerse the dry bath in water or any liquid.

The blocks may also be cleaned in a mild soapy solution. Be sure that all

items have thoroughly dried before attempting to connect the cord or use

the unit.

Spills: In the event liquid is accidentally spilled into the bath or well area,

disconnect the plug from the outlet and turn the unit upside down to

minimize liquid contact with the internal components. Remove the bottom

cover and inspect to assure liquid has not contacted heater elements,

electronic controls, or connectors. Have a qualified service technician clean

the unit and replace any damaged parts.

11.0 Equipment Disposal – European Regulations

According to Directive 2012/19/EU of the European Parliament and of the

Council of 4 July 2012 on waste electrical and electronic equipment (WEEE),

the Corning LSE Digital Dry Bath Heater is marked with the crossed-out

wheeled bin and must not be disposed of with domestic waste.

Consequently, the buyer shall follow the instructions for reuse and recycling

of waste electronic and electrical equipment (WEEE) provided with the

products and available at the following link: www.corning.com/weee

12.0 Appendix: Symbols and Conventions

The following chart is an illustrated glossary of the symbols that may be

used in this manual or on the product.

CAUTION: This symbol refers you to important operating

and maintenance (servicing) instructions within the product

Instruction Manual. Failure to heed this information may

present a risk of damage or injury to persons or equipment.

ATTENTION: Hot Surface.

Indicates disposal instruction.

DO NOT throw this unit into a municipal trash bin when this

unit has reached the end of its lifetime. To ensure utmost

protection of the global environment and minimize pollution,

please recycle this unit.